New Envi 04' BA XR6T Ute - Buy my 20s cheap!

by **someLS1** » October 15th, 2011, 11:54 pm

Got some pics today of the ute with my mates xr6t ute at the Cruise for Charity.

Can see the painted cooler, put a turbo badge on too... new lights etc pretty hard to tell from pics. But anyway was good to have the ute clean

Got home now cant lock the passenger door lol Wilson advises me it is a cheap and easy fix

by **someLS1** » October 25th, 2011, 4:51 pm

Hey guys i wanna get stuck into painting my rims this long weekend. Want to go matt/satin black like pic below

After some advice ive never tackled painting rims myself, ive got the paint side sorted i think. Just using cans. But its more the prep the rims have a fair bit of gutter rash, is there any sort of "body type filler" that can be used on rims?? and just maybe some grades of sandpaper to prep em as they have been painted before and the paint is pretty thick on them.

Cheers in advance any help would be great.

PS rims are worth about 100 bucks off ebay so i got no interest in sending em away to get painted :thumbsup:

by **[Sterling]** » October 25th, 2011, 5:17 pm

Best to speak to pat, he's painted a few rims.

by **justa6** » October 25th, 2011, 7:30 pm

some paint stripper, so you don't have to sand all those layers off. then sand smooth. prime and paint.

i know you don't want it low, but it would look tuff .

by **[D1SCNT]** » October 25th, 2011, 8:40 pm

thats not a bad idea messy tho. still you will have to do some filling after you strip them unless you just grind out your rash and scuffs but then your just going to have low spots all over the place. i know its just a rim but id just leave the og paint fill the low spots, primer then paint. saves buying paint stripper and the extra hours. and id do it with a gun also

but i understand u dont have all the gear man.

just my opinion anyways

by **someLS1** » October 25th, 2011, 10:12 pm

justa6 im getting 1" lowering block wont be dumped but the back wont look as jacked. mmm paint stripper is an idea.

Pat i wouldnt strip em either prob its just the last layer of paint some newb like me painted and its sooo thick so i thought some sort of sand would be good?

What sort of filler would you use on rims?

Yer i know itd come out mint from the gun but i figured the matt black look wouldnt be too bad from cans... my mate touched up his bf gt rims with the same paint cans suprisingly came up alright. In the end its not a show car i guess.

by **[D1SCNT]** » October 26th, 2011, 11:53 am

i use regular body filler or fine filler, you just have to be sure you rub the area that your going to fill efficiently. then seal it with primer.

by **LOW_XR** » October 26th, 2011, 7:22 pm

if you got some gutter rash max you could hit the edges with a metal file. will take most of it out unless they are reall deep. also try not to use to much filler on your rim edges. dont want it to all chip off next time some retard changes your tyres.

by **someLS1** » October 26th, 2011, 9:24 pm

Mmm this filing idea sounds like a winner i was just thinking im bound to **** up this filling business haha... might file the shit out of them and anything that doesnt come out just paint over it haha will be matt black cant be that easy to see once its all filed and painted haha.

Cheers for all the advice boys will let ya know how i go. :thumbsup:

by **someLS1** » November 10th, 2011, 1:00 pm

Well i had the day off tues and decided to get off my bum and paint 2 of the 18s black.

Turned out pretty good i think, the 2 i painted had bugger all gutter rash so i didnt fill anything basically just wet and dry sanded 3 coats of primer high fill and 3 top coats and here is the result.

Thanks John Z for helping as always. The big test will be to see if they peel or anything like that or chip real easy i hope not, but time will tell. Hard to tell but the silver wheels were so farked so even paint wise looks heaps better i think

anyway pics

Next gotta do the other 2 wheels which are in worse condition

by **BLKPHN** » November 10th, 2011, 1:59 pm

Should have done them in a saturn finish or Matt finish. Still looks great though.

Have they started building and houses in that court yet??

by **someLS1** » November 10th, 2011, 3:05 pm

They are satin black mate maybe because they are still fresh they look too shiny? Not sure i was worried matt would be too dark.

Still no sign of construction in that court i wonder why and what the prob lem is been like that for yrs now

by **EFFalcon** » November 10th, 2011, 3:24 pm

that last photo makes them look real glossy

by **BLKPHN** » November 10th, 2011, 5:54 pm

someLS1 wrote:They are satin black mate maybe because they are still fresh they look too shiny? Not sure i was worried matt would be too dark.

Still no sign of construction in that court i wonder why and what the prob lem is been like that for yrs now

Ah ok yeah they look really gloss in the last pic.. It makes those wheels look so much better.

i wonder what the problem is... i reckon we offer them $5 for the land..

by **someLS1** » November 11th, 2011, 1:33 am

BLKPHN wrote:
someLS1 wrote:They are satin black mate maybe because they are still fresh they look too shiny? Not sure i was worried matt would be too dark.

Still no sign of construction in that court i wonder why and what the prob lem is been like that for yrs now

Ah ok yeah they look really gloss in the last pic.. It makes those wheels look so much better.

i wonder what the problem is... i reckon we offer them $5 for the land..

Yer it makes no sense to me i mean the rd and paths lights etc crossovers have all been done i assume services are there? It always used to be fenced off now it isnt even fenced off like the developer or whoever has just given up! Its strange its not a bad spot have a great view up there if you built a house. I say we find out and invest!!!

by **someLS1** » November 17th, 2011, 11:09 am

Better ride height??

Some might have seen on fb been trying to do the wheel bearings.. finally got it done was amazed to see how fucked they were!! theres a lesson for all you BA owners!! jack up the car and wiggle the wheel mine was prob not far off falling off!!!

by **someLS1** » December 6th, 2011, 3:05 pm

Well nothing new with the ute really.. have my lowering blocks to put in and still need to paint 2 of the rims... but not enough time and effort in the day.

But with the calais i threw some black FR19s on looks pretty decent might have to get mine powdercoated black one day.

I now know the limits of the rear... 275s no fit... but looked kinda cool, prefer to stick with the low height and 245s though.

Enjoy

by **EFFalcon** » December 6th, 2011, 3:08 pm

Black Centres look awesome.
and taht rear shot.... mint!

by **someLS1** » December 6th, 2011, 3:18 pm

Cheers Wilson!!!

Yer one day when ive run out of things to blow money on i might get em done in black it does look cool!!

Yer the 275s just dont fit with my ride height id have to get the guards pumped. Plus the wider 9.5" wheels have less dish to accomodate the extra width.

If only i could get dual exhaust and a metal drop tank... but alas ive looked into both and no go lol

by **private9** » December 6th, 2011, 3:32 pm

That looks awesome Max!

someLS1 wrote:Cheers Wilson!!!

Yer one day when ive run out of things to blow money on i might get em done in black it does look cool!!

Yer the 275s just dont fit with my ride height id have to get the guards pumped. Plus the wider 9.5" wheels have less dish to accomodate the extra width.

If only i could get dual exhaust and a metal drop tank... but alas ive looked into both and no go lol

How hard are the 275s rubbing on yours? Are they John's rims? I'll have to ask him the offset on those.

IIRC, CSV used to do a dual exhaust setup with a modified bar to suit. VERY tight for clearance though you'd think.

by **someLS1** » December 7th, 2011, 11:17 am

Cheers Justin.

Yer the 275s with that height are rubbing hard like even just rolling at a few kms/h haha one of the tyres got sliced hard by that guard. He will have to put some undersized tyres me thinks maybe 255s so they stretch in a bit. Yea mate pm John they are a fairly different offset to mine even the centres are different thicknesses.

Ahhh csv good tuner shame he moved back to Mildura!! Yer those setups look a little gay when you look under the car. I had this whiz bang idea because VZ Monaros get twin exhaust that id get a monaro petrol tank and itd be all sweet buuut turned out the floor pan of the boot was completely different so there went that idea

BTW mate im gonna be chasing 3.7 gears, tru trac, and harrop diff cover early next year

can you get all that stuff in?

by **EFFalcon** » December 7th, 2011, 11:26 am

John got FR's?
He's trying far too hard to look like you max

by **someLS1** » December 7th, 2011, 11:40 am

EFFalcon wrote:John got FR's?
He's trying far too hard to look like you max

Yer lol our cars look basically the same.. other then like colour differences!!! haha oh and his will be quicker... but hey you cant tell that by just looking at it.

by **someLS1** » December 19th, 2011, 3:52 pm

Small update finished painting the other 2 rims got all 4 black 18s back on finally pretty happy with how they turned out and the look.

Also who needs lowering blocks!!???

by **private9** » December 19th, 2011, 7:05 pm

someLS1 wrote:Cheers Justin.

Yer the 275s with that height are rubbing hard like even just rolling at a few kms/h haha one of the tyres got sliced hard by that guard. He will have to put some undersized tyres me thinks maybe 255s so they stretch in a bit. Yea mate pm John they are a fairly different offset to mine even the centres are different thicknesses.

Ahhh csv good tuner shame he moved back to Mildura!! Yer those setups look a little gay when you look under the car. I had this whiz bang idea because VZ Monaros get twin exhaust that id get a monaro petrol tank and itd be all sweet buuut turned out the floor pan of the boot was completely different so there went that idea

BTW mate im gonna be chasing 3.7 gears, tru trac, and harrop diff cover early next year can you get all that stuff in?

Nice, I'll flick John a PM - they look pretty damn nice!

Yeah, unfortunately VZ Monaro is fairly different everywhere. And those CSV twin style setups do look fair gay underneath, and there's SFA clearance to the bar on the RHS, dunno how it'd go longterm.

3.70s (genuine GM and Motive Gear), Truetracs (Harrop AND Eaton) and Harrop diff covers (Sports and Enduro) are all in stock pretty much all the time

by **Kenaz** » December 20th, 2011, 8:33 am

The Calais looks amazing with the black FRs. A+++++ will fap again

by **someLS1** » December 20th, 2011, 11:26 am

private9 wrote:
someLS1 wrote:Cheers Justin.

Yer the 275s with that height are rubbing hard like even just rolling at a few kms/h haha one of the tyres got sliced hard by that guard. He will have to put some undersized tyres me thinks maybe 255s so they stretch in a bit. Yea mate pm John they are a fairly different offset to mine even the centres are different thicknesses.

Ahhh csv good tuner shame he moved back to Mildura!! Yer those setups look a little gay when you look under the car. I had this whiz bang idea because VZ Monaros get twin exhaust that id get a monaro petrol tank and itd be all sweet buuut turned out the floor pan of the boot was completely different so there went that idea

BTW mate im gonna be chasing 3.7 gears, tru trac, and harrop diff cover early next year can you get all that stuff in?

Nice, I'll flick John a PM - they look pretty damn nice!

Yeah, unfortunately VZ Monaro is fairly different everywhere. And those CSV twin style setups do look fair gay underneath, and there's SFA clearance to the bar on the RHS, dunno how it'd go longterm.

3.70s (genuine GM and Motive Gear), Truetracs (Harrop AND Eaton) and Harrop diff covers (Sports and Enduro) are all in stock pretty much all the time

Fantastic mate mate John mentioned he got it all through you so figured you would have most of it just wasnt sure if you'd have genuine 3.7s. But sounds great ill hit you up in Jan to price it all up etc. Need something better then a 3.07 lsd for easternats next year!!

by **someLS1** » December 20th, 2011, 11:27 am

Kenaz wrote:The Calais looks amazing with the black FRs. A+++++ will fap again

Hahaha thanks Ash appreciate it mate. Shame they are not mine but hey mine have more dish ahhahaha :good:

by **justa6** » December 20th, 2011, 11:41 am

Ute looks good man. I like the black and love the height ha ha

by **someLS1** » December 20th, 2011, 10:57 pm

justa6 wrote:Ute looks good man. I like the black and love the height ha ha

Cheers mate... kinda makes me wanna get some cheap rear airbag setup or something hahaha looked tough!

One of these days i gotta look up your build thread from your sig sounds like your ute is an absolute animal. :thumbsup:

by **needfordspeed** » December 21st, 2011, 12:36 am

Ute looks mad!

Calais looks pretty cool as well man, whens the box getting replaced?

by **someLS1** » December 21st, 2011, 9:28 am

needfordspeed wrote:Ute looks mad!

Calais looks pretty cool as well man, whens the box getting replaced?

Cheers Gilly :drinks2:

Im going to start sorting it all out with the box and diff Jan/Feb I want it ready for Easternats next year.

by **Sunboost** » December 21st, 2011, 10:09 am

Calais looks sweet. I miss my Clubbie sometimes. Shame I never got to bring it out to any events!

by **someLS1** » January 3rd, 2012, 10:49 am

Sundeep wrote:Calais looks sweet. I miss my Clubbie sometimes. Shame I never got to bring it out to any events!

Cheers man. Yer shame you never got it to the track that time a few of us were running.

Well its the new year and im gonna start prepping for the nats need this auto and diff. Just sending a pm to you Justin for all the stuff.

Utes survived the holidays only one hose blew in the heat lol off to echuca in 40 degrees hope no more hoses blow!!!

by **someLS1** » January 20th, 2012, 11:08 am

Thanks alot to Justin of Tuff Car Parts ive recieved all my diff parts now for the calais! This should mean no more embarrassing pegging and hopefully make it hook up easy at the nats with the 3.7s!

Just need to get my housing off a bloke next week and then will go to supatrick in dandenong to get the diff built! :drinks2:

by **someLS1** » March 28th, 2012, 11:21 am

Im thinking of selling the ute i really cannot afford to keep an xr6t ute and a 5.7ltr v8 now that im completely unemployed!

Not asking a huge lot i got it cheap off a mate and willing to do the same for someone on here... if it hits carsales it will be advertised for more.

Looking at around $11,000 no rwc with REG. Will do a FS thread soon.

by **mr calais49** » March 28th, 2012, 4:27 pm

ill swap you a my working 4l65e box for the ute

by **someLS1** » March 28th, 2012, 5:34 pm

Nah mate got the box sorted but after i pay the bill for that which isnt cheap and with 2 holidays coming up and zero income lol... this ute has to go!

by **SLO4LT** » March 30th, 2012, 6:08 am

Sell your car Craig and buy this!!

by **mr calais49** » March 30th, 2012, 12:38 pm

haha no chance damo as much as id like a xr6t this will be my last car for quit a while

Who is online