Dan's GQ Patrol / KTM rebuild

Post pics of your rides here
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Dan's GQ Patrol / KTM rebuild

Post by Dansedgli »

Showroom time.

In short, I bought this cheap and not running in August last year and just finished getting it ready for a rwc today.

Turns out I don't have as much spare time as I thought. :confused:

Image

Its a 6 speed LS1 and will be station hacked.
User avatar
samftr
Idling
Posts: 179
Joined: August 1st, 2007, 11:23 pm

Re: VX

Post by samftr »

Station hacked. Thought about this for a minute (driven to train or bus station??)
User avatar
samftr
Idling
Posts: 179
Joined: August 1st, 2007, 11:23 pm

Re: VX

Post by samftr »

Was it pretty cheap and what was wrong with it??
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Train station.
User avatar
TUFED6
Full Boost
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima

VX

Post by TUFED6 »

Did someone wash it for you?
NUT347
Melting Pistons
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane

Re: VX

Post by NUT347 »

Turbo it.

Did you sell the ute?
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

I washed it all by myself. Even went and bought a sponge and soap.

I've still got the ute for now. Need to weld up cooler pipe holes on that too. :|

Next project will be to build a trailer with the shit under the house once the ute sells. Should be completed 2015.
User avatar
Nikk O'lass
Full Boost
Posts: 2203
Joined: September 9th, 2007, 8:14 pm
Location: Tamworth

Re: VX

Post by Nikk O'lass »

Need's moar chev badges.
.T..I..C..K..F..O..R..D
\≡≡T≡≡/
User avatar
Sunboost
Moderator
Moderator
Posts: 6900
Joined: July 13th, 2007, 11:18 am

Re: VX

Post by Sunboost »

Looks too clean for you.
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Give it some time.
ClassicAU
Hitting N2O
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne

Re: VX

Post by ClassicAU »

Impossible to sell a V8 these days hey! Pretty good for a station hack, at least its factory. Should do what I do now though, and walk to the station, then it can be weekend only! :D
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

I walk if the weather doesn't look like rain. Good fucking luck these days.
User avatar
TUFED6
Full Boost
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima

Re: VX

Post by TUFED6 »

How fast did it run with the pump?
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Not very. 13.6 at 110mph from memory.

Clutch wouldnt hold boost in 3rd and first time out I think. It made 315rwkw on 5 psi or something. Valve springs needed doing for more.
ClassicAU
Hitting N2O
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne

Re: VX

Post by ClassicAU »

Dansedgli wrote:I walk if the weather doesn't look like rain. Good fucking luck these days.
Man up!! That's why they invented rain coats! Less daily, moar boost!
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Just because it gets driven to the station doesnt mean it cant be modified. :/

The ute was station hacked while it was turbo, 6 speed.

RWC booked in for Wednesday.
ClassicAU
Hitting N2O
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne

Re: VX

Post by ClassicAU »

That's the spirit! :good: I was dailying mine with the blower up until I started working in the city again last week.
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Just needs a tie rod end and a windscreen. Easier than all my e series rwc's. :D
User avatar
Sunboost
Moderator
Moderator
Posts: 6900
Joined: July 13th, 2007, 11:18 am

Re: VX

Post by Sunboost »

Where'd you go? :D
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

Across the road from my parents place.

The VX is in pretty good nick though and it's dead stock now. Not sure how he'd go for modded typhoons or green EA's.
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: VX

Post by Dansedgli »

All fixed and booked in for rego next Monday. :)

I gotta say for a $5k banga it goes pretty good.

Exhaust, intake, tune and towball and it'll be done.
ClassicAU
Hitting N2O
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne

Re: Dan's LS1 M6 VX exec

Post by ClassicAU »

God damn it, you paid less for this whole car than I did just to boost mine! :( Plus after said mods, you'll have more power, and still spent less than me! I knew I should'a bought an LS1! :banghead:
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: Dan's LS1 M6 VX exec

Post by Dansedgli »

It won't make 250. Maybe 230 at a stretch.

That'll do for a near stock car though. Cars don't interest me like they used to. Got new hobbies now. ;)
User avatar
needfordspeed
Moderator
Moderator
Posts: 5256
Joined: July 13th, 2007, 2:13 pm

Dan's LS1 M6 VX exec

Post by needfordspeed »

It'll probably get mad fuel economy too, my old VT had similar mods and a mail order tune, and got the best economy out of any car I've owned.
1988 EA S-Pack - 10.6@125MPH New build underway
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

Dansedgli wrote:It won't make 250. Maybe 230 at a stretch.

That'll do for a near stock car though. Cars don't interest me like they used to. Got new hobbies now. ;)
Its more then enough i reckon and being a lighter exec you should be able to squeeze in a 12.9 if you cbf racing.
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
private9
Hitting N2O
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Contact:

Re: VX

Post by private9 »

Dansedgli wrote:All fixed and booked in for rego next Monday. :)

I gotta say for a $5k banga it goes pretty good.

Exhaust, intake, tune and towball and it'll be done.
Can't go wrong with catback, OTR & tune on these things - on the early girls especially it transforms them - esp low-mid range.

Scrounge around s/h and you can pickup some decent bargains too!
Image
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: Dan's LS1 M6 VX exec

Post by Dansedgli »

12.9's - mid 13's and good economy. Sounds good to me.

Once its on the road ill check ebay for bargains. I don't want it loud which might be tricky.

Its already got a HSV exhaust system on it, not sure how it compares to aftermarket but I like how it sounds.
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

Well to give you an indication mine run a 13.1 and its a fuckload heavier then yours so you should do a fair bit better then mid 13s. You might need to pay for a decent tune though the oztrack mail orders are alright but arent very aggressive overly safe so yea mid 13s lol. Also i drove mine day in day out in traffic with an auto thrashing it and the economy sat in the 14s low 15s which i think is decent for the driving it almost never saw open road. Better then my xr6t ute stock.

I fiddled with a hsv exhaust/extractors back in my vy ls1 they arent much chop to be honest the exhaust still has plenty of bits that are squished/flattened i dunno what for maybe epa or noise requirements. I dunno i reckon my vy sounded nasty but i guess depends on the setup mine had the rear muffler missing so it sounded weird. Look out for a 2nd hand 2.5" difillipo cat back make sure it has all the mufflers you wont be disapointed thats how i bought mine it wasnt overly loud at all. You will find if you go big 4 into 1 extractors is what makes all the noise.
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
needfordspeed
Moderator
Moderator
Posts: 5256
Joined: July 13th, 2007, 2:13 pm

Re: Dan's LS1 M6 VX exec

Post by needfordspeed »

Mine had HSV extractors and twin 2.5" exhaust, wasn't too loud. Also had a OZTRACK mail order tune and a GTS intake pipe, only made 200rwkw so it still felt slow, but total cost was like $700 (already came with exhaust) and it got around 11l/100km

If I was you i'd just get a mail order and ask for max economy, LS won't feel fast unless it's force fed.
1988 EA S-Pack - 10.6@125MPH New build underway
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

dont go gts maf pipe! waste of time
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
needfordspeed
Moderator
Moderator
Posts: 5256
Joined: July 13th, 2007, 2:13 pm

Re: Dan's LS1 M6 VX exec

Post by needfordspeed »

^^^Agreed, i'm just listing what I done though lol.
1988 EA S-Pack - 10.6@125MPH New build underway
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

Did the vx 1 get the ls6 manifold? i forget i know vt didnt.. if it doesnt have one change that cost you **** all and will add a decent amount of power
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
private9
Hitting N2O
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Contact:

Re: Dan's LS1 M6 VX exec

Post by private9 »

If you've already got a HSV catback and you're happy with the sound, just leave it! They're not great, but loads better than the factory Holden systems.

OTR + tune and it's done!

Re mail orders, there are some good guys out there, but just be very careful as there are plenty of bad tuners out there too. A search of a tuner's name on http://www.ls1.com.au" onclick="window.open(this.href);return false; should give you at least an indication.
Image
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: Dan's LS1 M6 VX exec

Post by Dansedgli »

Thanks guy. Yeah VX has the better intake.

I dunno about those mail order tunes. Seems risky. A mate uses autotechnique and reckons they are good so I might just go there.

The ute doesn't have any bbm switching still so the stock ls1 feels quite quick. Lol
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

A mail order in an ls1 isnt risky at all. It wont be as good as a proper tune but certainly not risky i havent heard anyone i know with one have any trouble. If you go custom tune please avoid GM Motorsport at all cost! C&A seem reasonable and a good price from what ive heard. CSV used to be the best back in the day but unless you wanna drive to mildura not really an option.
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
someLS1
Breaking Traction
Posts: 1424
Joined: July 15th, 2007, 6:21 pm

Re: Dan's LS1 M6 VX exec

Post by someLS1 »

In saying that id only go oztrack mail order they have been around for a long time and thats the one ive never heard problems from
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
samftr
Idling
Posts: 179
Joined: August 1st, 2007, 11:23 pm

Re: Dan's LS1 M6 VX exec

Post by samftr »

Had they sorted out the "reliability" issues in the vx? Oil use age and rods etc?
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: Dan's LS1 M6 VX exec

Post by Dansedgli »

I'm sure after 10 years someone would have noticed something like that wrong with it.

Oztrack sounds the go then if it's going to save me $600.
User avatar
samftr
Idling
Posts: 179
Joined: August 1st, 2007, 11:23 pm

Re: Dan's LS1 M6 VX exec

Post by samftr »

Pretty good bargain then!
User avatar
Kaddis
Breaking Traction
Posts: 1134
Joined: July 14th, 2007, 6:55 pm
Location: S.E Melbourne

Re: Dan's LS1 M6 VX exec

Post by Kaddis »

Nice daily! No spoiler, hubcaps, SL's and it would be mint!
Post Reply