Wombi's El Xr sold. New au ute

braad · Post by **braad** » August 22nd, 2012, 4:29 pm

looks nice with the argents

whats that in the shed?

wombi90 · Post by **wombi90** » August 22nd, 2012, 5:01 pm

Was my project but I've canned it going to make the el a nice n/a daily while I'm still on my ps and buy a repairable write off ba/bf/fg turbo or a na and buy a turbo stat write off and make one from two I'm a panel beater so I'll just fix it myself and have that as a project car

wombi90 · Post by **wombi90** » August 22nd, 2012, 5:05 pm

Took some photos today while I was out it's only with a iPhone

wombi90 · Post by **wombi90** » August 24th, 2012, 3:33 pm

Finally got the BA GT wheels on they seem really bright but it's a shit day here and the cars filthy, need to hurry up and fit the ssl front springs but I need to roll my guards when I get back to work and get the rear down abit more, cars dirty aswell haha

icachn · Post by **icachn** » August 24th, 2012, 5:20 pm

ba gt rims look neat on the el, i prefer them over the dark argents.

wombi90 · Post by **wombi90** » August 24th, 2012, 7:54 pm

Thanks mate they look good I reckon just weird at the start, probably keep the dark argents for my el ghia

OMY-747 · Post by **OMY-747** » August 24th, 2012, 11:02 pm

Those rims look sweet as bud

wombi90 · Post by **wombi90** » August 25th, 2012, 8:45 am

Thanks man, now just have to lower the front fit all the cam stuff find the rest or a complete bodykit and its done

wombi90 · Post by **wombi90** » August 25th, 2012, 8:34 pm

Just fitted the ssl's to the front sits so much better now, needs a camber kit and wheel alignment quick smart though, I'll try to get it done before I fly out Wednesday, makes the wheels look so much better

wombi90 · Post by **wombi90** » August 25th, 2012, 9:08 pm

LUVSIT · Post by **LUVSIT** » August 26th, 2012, 9:04 pm

looks awesome now justin!!

wombi90 · Post by **wombi90** » August 26th, 2012, 9:15 pm

Thanks man! Took some better photos of it lowered still only with a iPhone I really must get a decent camera

LUVSIT · Post by **LUVSIT** » August 26th, 2012, 9:22 pm

thats ssl all round yeah?
IMO i dont think it sits that low, kinda looks like mine on sl kings :S

wombi90 · Post by **wombi90** » August 26th, 2012, 9:24 pm

Yeah ssl's springs were near new when I bought them so they should settle lower still, I want the rear lower around 1cm

wombi90 · Post by **wombi90** » August 26th, 2012, 9:27 pm

Can't wait till my koni's turn up ordered them From tuffcarparts Thursday money cleared and they were posted Friday I reckon they'll be here tomorrow,

LUVSIT · Post by **LUVSIT** » August 26th, 2012, 9:30 pm

wombi90 wrote:Can't wait till my koni's turn up ordered them From tuffcarparts Thursday money cleared and they were posted Friday I reckon they'll be here tomorrow,

awesome! i really need new shocks lol

wombi90 · Post by **wombi90** » August 26th, 2012, 9:35 pm

Yeah my rears are fucked, i wasn't buying s/h for them to be the same either and Justin's prices are the great, I coulda got koni reds but the price difference isn't that great so just got the better ones

LUVSIT · Post by **LUVSIT** » August 26th, 2012, 9:39 pm

yeh ive heard real good things about justin from tuff car parts, when i go with my konis ill deffs go thru him.

wombi90 · Post by **wombi90** » August 26th, 2012, 9:46 pm

I only got rears from him I was going to get fronts but I might get my bilstiens rebuilt depends on the price difference

LUVSIT · Post by **LUVSIT** » August 26th, 2012, 9:51 pm

yer thats fair enough man

braad · Post by **braad** » August 27th, 2012, 10:06 am

Looks good with the BA GT wheels. Just needs to settle

wombi90 · Post by **wombi90** » August 27th, 2012, 1:40 pm

Thanks brad, just fitted the rear koni's so much better

, can tell the front shocks are stuffed, pulling the bilstiens from the other car now

OMY-747 · Post by **OMY-747** » August 27th, 2012, 8:14 pm

Looks even better again now it's lower mate

wombi90 · Post by **wombi90** » August 27th, 2012, 11:20 pm

Well the ba gt's were short lived pretty sure I buckled 1 or 2 driving to Melbourne and back, getting them checked out tomorrow, I pulled over in a servo and jacked each side and spun the wheel, looks like front right has a slight buckle, front left looks ok, I'll put the rear on stands and check the rear tomorrow,

braad · Post by **braad** » August 28th, 2012, 9:26 am

Lol damn, they were short lived

wombi90 · Post by **wombi90** » August 29th, 2012, 3:01 am

Yeah sure were, tyre shop wouldn't take them off my car today because of the spacers, so the ftrs are back on for now, im going to look at another set of ba gt wheels in a week, have a bit of rash though I'll fix them and paint them champagne might put them on my el Ghia,
I fly out to port Douglas today so I'll have to get them checked out when I get home, found a few other goodies lately too

if all turns out well I'll be happy just have to wait and see,

wombi90 · Post by **wombi90** » August 29th, 2012, 3:30 am

wombi90 · Post by **wombi90** » August 29th, 2012, 5:23 pm

Just bought this pretty sure it's a el gt gear knob

wombi90 · Post by **wombi90** » September 8th, 2012, 12:59 am

Slight change of plans sold all the stuff to suit the Crow cam so j3 cam vernier cam gear etc, I've got a dev 5 kit here now just have to check what head came with it the bloke said it was a race series head, I rang Jim mock he confirmed it was a dev 5 cam, has the roll master vernier gear Jim mock valve springs, and it has a ported bbm aswell, going to rebuild a motor looking into a acl rebuild kit with high comp pistons,

Im going to do the manual conversion once my clutch shows up I've got a j3 to just suit a el xr6 manual from a mate I'm going to borrow till the new motor will go in and I'll get cve to tune it,

Picked up a Ed Xr diff that was rebuilt with 3.9s so I'm going to get that center put in this diff aswell

misk · Post by **misk** » September 8th, 2012, 1:42 am

how do you like the konis dude?
how firm did you set them?
they are sooo much better than the usual shit that people use.

also, pleaase send those templates dude

wombi90 · Post by **wombi90** » September 8th, 2012, 2:07 am

Mine are on softest setting and there still pretty firm, you can Feel the front floating around over bumps and the rear is fine I'm selling my bilsteins and going to get koni yellows to match if I get around $200 for the bilsteins It won't be to much of a difference in price as getting the bilstiens rebuilt, I'll look for those templates over the weekend

wombi90 · Post by **wombi90** » October 10th, 2012, 8:39 pm

Long time since an update, well in the next week or two ill be receiving my ticky kit from JETXR thanks man,

I sold the crow cam and the rest of the stuff to go with it, but got a jmm head complete with vernier cam gear valve springs and a dev 5 cam, also brought an au Tickford motor to rebuild and use jmm stuff on ill be getting the sump cut and welded to clear the k frame,

Then there was another worked head with receipts on eBay so I put a bid on that thinking I wasn't going to win but I won it at the starting price so I'm picking that up after c4c,

Still waiting for my clutch to come from Turbo XR6 aus post lost it but its on its way I believe, and aus post lost my clutch pedal pin kit from malwood so they resent another last week aswell then I can start the manual conversion

OED666 · Post by **OED666** » October 10th, 2012, 9:12 pm

Did you receive the pedal pin kit yet?? Farken hope so!

wombi90 · Post by **wombi90** » October 10th, 2012, 9:19 pm

Nah man nothing yet, ill give it to the end if the week then ill go see aus post, but stuff I've bought of eBay has turned up so its weird

rat · Post by **rat** » October 10th, 2012, 10:33 pm

What are you doing with the jmm head? Going to sell it on? May be keen.

wombi90 · Post by **wombi90** » October 11th, 2012, 6:31 am

Which ever head I don't use will be for sale, I'm going to wait till I pick up the other and then ill decide which one to use.

rat · Post by **rat** » October 11th, 2012, 8:35 am

Cool cool. Did you confirm if the jmm was a race series?

wombi90 · Post by **wombi90** » October 11th, 2012, 11:57 am

Can't confirm what series it is but can confirm it is a jmm head, there's not much info on how to identify them which makes it hard

wombi90 · Post by **wombi90** » October 12th, 2012, 5:57 pm

A few pics of things

OED666 · Post by **OED666** » October 12th, 2012, 7:49 pm

any pedal pin kit yet???