Planned Mods thread.
- needfordspeed
- Moderator

- Posts: 5256
- Joined: July 13th, 2007, 2:13 pm
Re: Planned Mods thread.
Future plans:
-Buy XR6T
and until then:
-FInish wheels off
-Sort out something about timing chain
-New clutch+lightened flywheel
-Put the tickford kit on
-MAYBE wheels.....
-Buy XR6T
and until then:
-FInish wheels off
-Sort out something about timing chain
-New clutch+lightened flywheel
-Put the tickford kit on
-MAYBE wheels.....
1988 EA S-Pack - 10.6@125MPH New build underway
- Steady
- Breaking Intake Welds
- Posts: 4505
- Joined: July 14th, 2007, 4:10 pm
- Location: Melburn, where crackpipes burn speed
Re: Planned Mods thread.
TornadoSteady the MARTYR! wrote:Sprint
- Strip Daves car to copy his bracket and pullies- Done
- Get Wolf V500
- Install V2 SQ + V500 and assorted other bits , get tuned and run 6-8psi
- Build up Lokka diff with 3.7 gears
- Test fit Daves FR19s Done
- Take coil off rear springs
- Buy FR19s
ED Fairmont
- Clean + polish Done
- Degrease engine bay, fix oil leaks
- Fix rear power window reg that dan broke sort of done, block of wood holding it up
- Tyre shine stockies
- Sell
- block BOV
- dose pipe
- tint windows
- lower it a bit
- get carbra
- rice up engine bay
- Amon
- Breaking Traction
- Posts: 1426
- Joined: October 16th, 2007, 12:23 pm
- Location: Eastern Suburbs, Melbourne
- Contact:
Re: Planned Mods thread.
ED
-Flash tune or something similar (heard flash tuning can be done to pre-au falcons now)
-3.9 gears in diff
-Fit thermos
-find some nice 18" wheels
-get a car jack that works
-better sway bars
-clear tail lights
-white background for dials
-Flash tune or something similar (heard flash tuning can be done to pre-au falcons now)
-3.9 gears in diff
-Fit thermos
-find some nice 18" wheels
-get a car jack that works
-better sway bars
-clear tail lights
-white background for dials
Beef or chicken ming mongs
- [Sterling]
- Double Clutching
- Posts: 5701
- Joined: November 27th, 2007, 8:25 pm
- Location: Im In Miami Trick!! a.k.a Chirnside park
Re: Planned Mods thread.
EF
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's
-spoiler
-and fix bonnet and random scratch's
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's
-spoiler
-and fix bonnet and random scratch's
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
Re: Planned Mods thread.
ED
tune for 10psi
dummy fit cooler and piping
trim scorcher bar
adjust exhaust brackets to stop knocking
hide more wiring
trim and paint the wooden base on which the battery box sits
tune for 10psi
dummy fit cooler and piping
trim scorcher bar
adjust exhaust brackets to stop knocking
hide more wiring
trim and paint the wooden base on which the battery box sits
Rollin wrote:At least I can deal with it while driving my boyfriend around in my car each weekend
- [Sterling]
- Double Clutching
- Posts: 5701
- Joined: November 27th, 2007, 8:25 pm
- Location: Im In Miami Trick!! a.k.a Chirnside park
Re: Planned Mods thread.
EF
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit-DONE!
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's-DONE!
-spoiler
-and fix bonnet and random scratch's
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit-DONE!
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's-DONE!
-spoiler
-and fix bonnet and random scratch's
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
Re: Planned Mods thread.
Planned mods for future:
-Take out loan
-Buy EL xr6
-Chuck on current springs, zorst
-Plug n' Play ECU
-Supercharge it
-Buy 18" FPV MkII Rims
-Custom paint-job
-Cruise
As for the EA:
-Keep thinking about manual conversion and better diff
-Drive her til end of uni, when i'll have money again
-Sell it, part it, or give it a bushbash send-off (by the time uni's over, she'll probably be on her last legs anyway, given the lack of time/money I'll have to keep her in good order/fix broken stuff)
-Take out loan
-Buy EL xr6
-Chuck on current springs, zorst
-Plug n' Play ECU
-Supercharge it
-Buy 18" FPV MkII Rims
-Custom paint-job
-Cruise
As for the EA:
-Keep thinking about manual conversion and better diff
-Drive her til end of uni, when i'll have money again
-Sell it, part it, or give it a bushbash send-off (by the time uni's over, she'll probably be on her last legs anyway, given the lack of time/money I'll have to keep her in good order/fix broken stuff)
'89 EA S Pack
--------------------------------------------------------
Pioneer Deh-3590 Player, Front - Pioneer 6" Splits/tweeters, Rear - 6" Pioneer 3-ways, Coustic c200 Amp, JL Audio 12" Boxed Sub
Pacemaker 4499's, Redback 2.5" exhaust, High-flow cat, K&N panel filter
Tinting, tinted tail-lights
Super lows all around
Crow 222825 cam
Stage 2 Shift Kit
TOTALLED 
--------------------------------------------------------
Pioneer Deh-3590 Player, Front - Pioneer 6" Splits/tweeters, Rear - 6" Pioneer 3-ways, Coustic c200 Amp, JL Audio 12" Boxed Sub
Pacemaker 4499's, Redback 2.5" exhaust, High-flow cat, K&N panel filter
Tinting, tinted tail-lights
Super lows all around
Crow 222825 cam
Stage 2 Shift Kit
Re: Planned Mods thread.
EA:
Move EB2 fairmont interior from shed into EA.
Move XR6T turbo setup from the maverick's front seat to EA.
Move koni reds and pedders springs from under the house to EA.
Make 250rwkw+
Get air con working.
Optimize tune for economy then use it as a daily when required.
Fit an auto or a lighter clutch.
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar.
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
Move EB2 fairmont interior from shed into EA.
Move XR6T turbo setup from the maverick's front seat to EA.
Move koni reds and pedders springs from under the house to EA.
Make 250rwkw+
Get air con working.
Optimize tune for economy then use it as a daily when required.
Fit an auto or a lighter clutch.
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar.
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
Re: Planned Mods thread.
MRDOSE -
Nothing CBF
TUFPAK -
Nothing CBF
Nothing CBF
TUFPAK -
Nothing CBF
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
Vixen BF F6 R-Spec
- Amon
- Breaking Traction
- Posts: 1426
- Joined: October 16th, 2007, 12:23 pm
- Location: Eastern Suburbs, Melbourne
- Contact:
Re: Planned Mods thread.
ed xr6
fit thermos (if and when i can get the clutch fan off)
fit slotted rotors when i cbf
fit 3.7 gears in diff
get tyres for new wheels
oh and wash the damn thing
fit thermos (if and when i can get the clutch fan off)
fit slotted rotors when i cbf
fit 3.7 gears in diff
get tyres for new wheels
oh and wash the damn thing
Beef or chicken ming mongs
Re: Planned Mods thread.
Plans for the EF are - fix zorst, new tyres, sell
AU- Sell, to buy a Sprint
AU- Sell, to buy a Sprint
Cammed Suzuki Baleno, Haltech PS1000, E85
- [Sterling]
- Double Clutching
- Posts: 5701
- Joined: November 27th, 2007, 8:25 pm
- Location: Im In Miami Trick!! a.k.a Chirnside park
Re: Planned Mods thread.
EF
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit-DONE!
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's-DONE!
-spoiler
-and fix bonnet and random scratch's
-get manual and fit it
-put new rocker cover on (all shiney red one!)
-slotted brake disc's
-chipped
-lowered (thinking superlows)
-shift kit-DONE!
-white dials
-tomorow ill be putting 18" FPV cobra rim's rollin on HP khumo's-DONE!
-spoiler
-and fix bonnet and random scratch's
-get manual and fit it
-put new rocker cover on (all shiney red one!)
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
Re: Planned Mods thread.
5sp ef futura
within next 6 months..
* get my rims 20" xoni cyclops with white walls
* lower more - just done ultras all round
* rip shift short throw shifter
* finish cutom boot install
* finish custom interior.. changing from white 2 black (whites way 2 impractical 4 a daily considering im a plumber lol)
* finally get my new personalised plates
within next 12 months..
* hopefully get a jim mock stage 2 fullflight turbo setup approx 320rwkw!! fark yea!! haha
within next 6 months..
* get my rims 20" xoni cyclops with white walls
* lower more - just done ultras all round
* rip shift short throw shifter
* finish cutom boot install
* finish custom interior.. changing from white 2 black (whites way 2 impractical 4 a daily considering im a plumber lol)
* finally get my new personalised plates
within next 12 months..
* hopefully get a jim mock stage 2 fullflight turbo setup approx 320rwkw!! fark yea!! haha
RIP 5sp sigma! best $150 ever spent!! sadly rolled 3 times haha
5sp ef futura
82 hilux mud truck 8" lift with 36" rubber
in stalkers words, there is no way i should have lost bloody kia
5sp ef futura
82 hilux mud truck 8" lift with 36" rubber
in stalkers words, there is no way i should have lost bloody kia
Re: Planned Mods thread.
EA:
Wreck and crush
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar. Done
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
EF:
Replace brakes
Fix unusual trans behaviour
Get RWC
Lower it.
Find and fit tufcaps
Fit ECU and get it running good.
Turbo
Wreck and crush
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar. Done
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
EF:
Replace brakes
Fix unusual trans behaviour
Get RWC
Lower it.
Find and fit tufcaps
Fit ECU and get it running good.
Turbo
Re: Planned Mods thread.
Install new fuel pump, 42lb injectors, 2:1 fuel reg.
Build my megasquirt and install it, get it running then get it tuned.
Get new 3" exhaust when I can't stand the leaks in the current exhaust any longer.
Within two years: Buy a BA Mk II XR6 Turbo (six speed of course) in Mercury Silver and just drive it till the mod bug bites. Keep the EA for special occasions or maybe not, haven't decided yet.
DISCLAIMER: The plans expressed above may change at any time. These plans may contain confidential, proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mis-transmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient.
Build my megasquirt and install it, get it running then get it tuned.
Get new 3" exhaust when I can't stand the leaks in the current exhaust any longer.
Within two years: Buy a BA Mk II XR6 Turbo (six speed of course) in Mercury Silver and just drive it till the mod bug bites. Keep the EA for special occasions or maybe not, haven't decided yet.
DISCLAIMER: The plans expressed above may change at any time. These plans may contain confidential, proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mis-transmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient.
FG G6E Turbo MkII - Nizpro Stage 3 - 364 rwkW - 11.63 sec @ 118 mp/h | I like the dark, I love the dark, but I hate nature. 

Re: Planned Mods thread.
Retire to tropical paradise
Die
Die
Re: Planned Mods thread.
Update on plans for my ED Futura.
Put bonnet and front bar on.
Get rego.
Run motor in.
Go Farken Drifting!!!
Put bonnet and front bar on.
Get rego.
Run motor in.
Go Farken Drifting!!!
Re: Planned Mods thread.
spray my car black, xr kit and supercharge it.
-
[D1SCNT]
Re: Planned Mods thread.
ED Ghia
sell it...
Buy XR6T BA/F ute or VY SS 6speed LS1 ute or VZ calais...
sell it...
Buy XR6T BA/F ute or VY SS 6speed LS1 ute or VZ calais...
- burnt turtle
- Full Boost
- Posts: 2211
- Joined: January 17th, 2008, 10:05 am
- Location: outside your window
Re: Planned Mods thread.
iv got a mate that is sellin his dash gauges 4 a VZ monaro u want?SLOLS1 wrote:VZ:
Ready to put in
Extractors, highflow cats, ultralows, stereo setup subs all that (have all this too damn lazy to put it in!!!),
In the future
19s, hsv cluster and gauges, senator bootlip spoiler, hektik engine covers, mafless tune, OTR CAI, 3.73 lsd, 3000rpm high stall, stockies, lots of skidz..... pretty much what any holden driver plans LOL.. vortech maybe one day in the future.... not soon
If i dont sell it and get sick of it and do all that shit might buy somethin cheap most likely a ford of some sort i can take to work and kick around on site

Re: Planned Mods thread.
TUFED6 wrote:Retire to tropical paradise with lots of hot naked flange
Die
Fixed
you're not an alcoholic til you're drinking nail polish and listerine that you shoplifted!


Re: Planned Mods thread.
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.Done (ghetto fixed)
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar. Done
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
Fit new flares Done
EF:
Replace brakes Done
Fix unusual trans behaviour
Get RWC Done
Lower it. Done
Find and fit tufcaps
Nitrous
Fit ECU and get it running good.
Exhaust and extractors to replace my cracked and broken current setup.Done (ghetto fixed)
Rebuild the carby when I cbf. LPG FTW.
Buy a bullbar. Done
Chop rear guards for clearance.
Move front diff forward 12mm for clearance. Done
Replace rear diff when it finally stops turning the wheels.
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto.
Fit new flares Done
EF:
Replace brakes Done
Fix unusual trans behaviour
Get RWC Done
Lower it. Done
Find and fit tufcaps
Nitrous
Fit ECU and get it running good.
Re: Planned Mods thread.
In order:
EA Wagon
- Fit EL Dash/wiring Done
- Fit 5.0 Done
- Slap some wheels on it Done
- put it on LPG
EF Turbo
- Swap Motor (rebuild + headwork)
- Fit Highstall
- Get Kit back on.
- replace paint
EA Wagon
- Fit EL Dash/wiring Done
- Fit 5.0 Done
- Slap some wheels on it Done
- put it on LPG
EF Turbo
- Swap Motor (rebuild + headwork)
- Fit Highstall
- Get Kit back on.
- replace paint
1995 Falcon GLi | 1997 EL GT | 1995 Falcon Futura | 1983 Thunderbird Heritage | 2003 Fairmont Ghia
Re: Planned Mods thread.
EL..
Spray bonnet DONE/front bar/rear bar
EL Ticky kit - Not doing anymore
Ultralows for the rear - Not doing anymore
Touch up small chips and scratches DONE
Put XR cam in until I get Dev 3 or 4 - Its in the boot..
New leads/plugs and panel/pod filter
White venetians
Possibly red wall tyres
Win best EF/EL at AFD
FAIL
Spray bonnet DONE/front bar/rear bar
EL Ticky kit - Not doing anymore
Ultralows for the rear - Not doing anymore
Touch up small chips and scratches DONE
Put XR cam in until I get Dev 3 or 4 - Its in the boot..
New leads/plugs and panel/pod filter
White venetians
Possibly red wall tyres
Win best EF/EL at AFD
[XGZ-566] 2009 BF3 XT EGAS WAGON
| 19x9 & 19X10 WORK EUROLINE'S | LOWERED |
[MR-PGR] 1980 XD FAIRMONT WAGON
| EFI WINDSOR | 14X8 & 14X10 12 SLOTTER'S | VENETIANS |
PREVIOUS RIDES: [WANTD-6] 2002 AU3 EGAS FORTE WAGON | [POPS4L] 1995 EF GLi WAGON | [EBW-302] 1991 EB GL WAGON V8 | [PHATEL] 1998 EL FAIRMONT TURBO
phat GUARD ROLLING | 0429 093 302 | facebook
| 19x9 & 19X10 WORK EUROLINE'S | LOWERED |
[MR-PGR] 1980 XD FAIRMONT WAGON
| EFI WINDSOR | 14X8 & 14X10 12 SLOTTER'S | VENETIANS |
PREVIOUS RIDES: [WANTD-6] 2002 AU3 EGAS FORTE WAGON | [POPS4L] 1995 EF GLi WAGON | [EBW-302] 1991 EB GL WAGON V8 | [PHATEL] 1998 EL FAIRMONT TURBO
phat GUARD ROLLING | 0429 093 302 | facebook
Re: Planned Mods thread.
EB II Fairmont
Chuck in a working stereo.
Pedders SL's and GSR.Done
Fix dent in bonnet or get new bonnet.
Eventually pull off the road (wont happen till at the earliest next year). Done. Fucking headgasket
Buy cheap shitter to get around in.
Snort stage 4 turbo kit, EMS 8860, 220rwkw till auto dies, then new tougher box.
Chuck in a working stereo.
Pedders SL's and GSR.Done
Fix dent in bonnet or get new bonnet.
Eventually pull off the road (wont happen till at the earliest next year). Done. Fucking headgasket
Buy cheap shitter to get around in.
Snort stage 4 turbo kit, EMS 8860, 220rwkw till auto dies, then new tougher box.
Last edited by Jim Beam on March 18th, 2008, 8:26 am, edited 1 time in total.
Daily: EB II Fairmont, legal low. Next stereo or turbo.
Re: Planned Mods thread.
Getting there.
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.Done (Paceys and sports system)
Rebuild the carby when I cbf.
Chop rear guards for clearance.
Replace rear diff when it finally stops turning the wheels. Bought
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto. rear locker purchased
EF:
Replace brakes Done
Fix unusual trans behaviour Done
Get RWC Done
Lower it. Done
Nitrous
Maverick:
Exhaust and extractors to replace my cracked and broken current setup.Done (Paceys and sports system)
Rebuild the carby when I cbf.
Chop rear guards for clearance.
Replace rear diff when it finally stops turning the wheels. Bought
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Lockers front and back when I win the lotto. rear locker purchased
EF:
Replace brakes Done
Fix unusual trans behaviour Done
Get RWC Done
Lower it. Done
Nitrous
Re: Planned Mods thread.
Updated list.
Maverick:
Rebuild the carby when I cbf.
Chop rear guards for clearance.
Sliders
Rear Bar
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Front locker
EF:
Finish Nitrous install
Maverick:
Rebuild the carby when I cbf.
Chop rear guards for clearance.
Sliders
Rear Bar
Fit an onboard air compressor.
Build drawers for the back for more storage space.
Front locker
EF:
Finish Nitrous install
- slo_sprint
- Spooling Up
- Posts: 949
- Joined: July 24th, 2007, 9:54 pm
- Location: Brisbane
Re: Planned Mods thread.
EB:
Pull motor and box out as spare
Strip it and sell what i can
Ditch the f'er
Sprint:
New Pads and rotors
Fix massive eff off oil leak
New airbox setup
New Back Tyres
Fit New Flywheel and clutch with Rebuilt T5
Rebuild Diff with lokka and shorter ratio
New Carpet Inside
More Power
Suspension Work
Wheels
Respray
Pull motor and box out as spare
Strip it and sell what i can
Ditch the f'er
Sprint:
New Pads and rotors
Fix massive eff off oil leak
New airbox setup
New Back Tyres
Fit New Flywheel and clutch with Rebuilt T5
Rebuild Diff with lokka and shorter ratio
New Carpet Inside
More Power
Suspension Work
Wheels
Respray
'97 Toyota Supra - 6Spd, Built 2J, T88H-38GK, HKS 272 Cams, Tilton Triple Plate, Haltech E11V2
Re: Planned Mods thread.
FG XR8:
- wait for Ford to make mine (mid June they say
) ... i want it now!!!
- keep stock until warranty ends because ive got a bad habit of modding my dailys
EF XR6 Turbo:
- finish off the (complex) heat shielding in engine bay
- cut, buff, polish & wax thingo.
- take it to drags for a final 1/4 time
- sell it
XG ute:
- tub it
- finish BA front end conversion
- cage
- get the Phoon motor running
- crack 500rwkw
- wait for Ford to make mine (mid June they say
- keep stock until warranty ends because ive got a bad habit of modding my dailys
EF XR6 Turbo:
- finish off the (complex) heat shielding in engine bay
- cut, buff, polish & wax thingo.
- take it to drags for a final 1/4 time
- sell it
XG ute:
- tub it
- finish BA front end conversion
- cage
- get the Phoon motor running
- crack 500rwkw
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims
EF XR6 Turbo -- SOLD
1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims
EF XR6 Turbo -- SOLD
1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Re: Planned Mods thread.
good work matty..... We were talking about your ute the other night..... Tub that bitch 
EF ECTIV
Coming Soon: Ford Strokers 363 Windsor, BorgWarner s400 sx3 76mm, 60mm Turbosmart gate, TH400 box, Kaaz diff
2013 G6E Turbo
Stock daily
Allfast Torque Converters 08 9249 3066
Coming Soon: Ford Strokers 363 Windsor, BorgWarner s400 sx3 76mm, 60mm Turbosmart gate, TH400 box, Kaaz diff
2013 G6E Turbo
Stock daily
Allfast Torque Converters 08 9249 3066
Re: Planned Mods thread.
Exhaust and paceys
Tint
Headwork
BA GT's hopefully 18
super lows al round
thats it for now
Tint
Headwork
BA GT's hopefully 18
super lows al round
thats it for now
1985 BMW 318i
1988 Suzuki Sierra (2'' extended shackles, 31'' BF goodrich muddies, 2'' body lift, lightforce spotlights)
1988 Suzuki Sierra (2'' extended shackles, 31'' BF goodrich muddies, 2'' body lift, lightforce spotlights)
- Nikk O'lass
- Full Boost
- Posts: 2203
- Joined: September 9th, 2007, 8:14 pm
- Location: Tamworth
Re: Planned Mods thread.
Blueprint for a better ED: Mission impressionalbe
-Make rear end inline with rest of car
-Install LSD, with New swaybars, Bushes, Possibly Lower springs
-Upgrade breaks
-Remove 14 years of carpark dents
-Paint it, custom 3 layer Le Mans red pearl
-Turbo, if the balance is favorable
-New wheels, maybe, if i cant get a replacement
-Mild interior rehash (Prob just some basic buckets and shit)
-Make rear end inline with rest of car
-Install LSD, with New swaybars, Bushes, Possibly Lower springs
-Upgrade breaks
-Remove 14 years of carpark dents
-Paint it, custom 3 layer Le Mans red pearl
-Turbo, if the balance is favorable
-New wheels, maybe, if i cant get a replacement
-Mild interior rehash (Prob just some basic buckets and shit)
.T..I..C..K..F..O..R..D
\≡≡T≡≡/
\≡≡T≡≡/
Re: Planned Mods thread.
My ED
Engine
CMS stage 3 cam, head, valve kit
ACL Race dished pistons
Pacemaker Extractors
Shine up rocker cover and Intake
XR6 computer and fuel reg
CAI Induction
Trans
Big cooler
Shift kit
Temp gauge
Electronic Shift kit
Diff Gears
Paint
Cut, Polish
fix stone chips
And ah yeah
Engine
CMS stage 3 cam, head, valve kit
ACL Race dished pistons
Pacemaker Extractors
Shine up rocker cover and Intake
XR6 computer and fuel reg
CAI Induction
Trans
Big cooler
Shift kit
Temp gauge
Electronic Shift kit
Diff Gears
Paint
Cut, Polish
fix stone chips
And ah yeah
FOUNDER OF MY OWN FUCKING CLUB!
Re: Planned Mods thread.
New List:
ED:
New Shocks / Struts
Boot Install
Turbo
Escort:
Finish stripping the car
Respray
Rebuild Engine (maybe turbo)
Rims
Lower
etc, etc
ED:
New Shocks / Struts
Boot Install
Turbo
Escort:
Finish stripping the car
Respray
Rebuild Engine (maybe turbo)
Rims
Lower
etc, etc
BF MkI XR6T
Lockie wrote:You can't speak English good because you came here on a leaking door!
Re: Planned Mods thread.
What year escort?
1985 BMW 318i
1988 Suzuki Sierra (2'' extended shackles, 31'' BF goodrich muddies, 2'' body lift, lightforce spotlights)
1988 Suzuki Sierra (2'' extended shackles, 31'' BF goodrich muddies, 2'' body lift, lightforce spotlights)
Re: Planned Mods thread.
1980 IIRC. 2.0L Ghia.abcisfun wrote:What year escort?
BF MkI XR6T
Lockie wrote:You can't speak English good because you came here on a leaking door!
Re: Planned Mods thread.
iv done allright.holmsy wrote:mine is slowly getting there. but very slowly.
-replace or fix multiple problems with the engine
-17 or 18 inch mags
-will be happy if i get 130-140 rwkw
-get lsd
done more then planned but still no rims.
so far have replaced engine.
put in au motor
got lsd 3.45
finished all the au seats and console,
finished colour coding exterior,
and more little thingss
still to do:
mags
short shifter
hiflow cat (this week)
ecu
not sure how the power aim is going. should be getting up there soon.
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS


Re: Planned Mods thread.
ED Falcon Wagon
Soon Mods:
A new Kenwood CD player (This week, my first ever car mod!
)
Buy a sub or two and an amp
Lower 2"
Later Mods (next 4 years...realistically haha)
New wheels, 18''s
Turbo it with all necessary mods.
Re-spray in dark metallic blue.
with that I would be very happy
Soon Mods:
A new Kenwood CD player (This week, my first ever car mod!
Buy a sub or two and an amp
Lower 2"
Later Mods (next 4 years...realistically haha)
New wheels, 18''s
Turbo it with all necessary mods.
Re-spray in dark metallic blue.
with that I would be very happy
- [Sterling]
- Double Clutching
- Posts: 5701
- Joined: November 27th, 2007, 8:25 pm
- Location: Im In Miami Trick!! a.k.a Chirnside park
Re: Planned Mods thread.
EF
-slotted brake disc's
-chipped-Swaped with XR6 ECU-DONE
-lowered (thinking superlows)
-shift kit-DONE!-SOLD!
-white dials
-18" FPV cobra rim's rollin on HP khumo's-DONE!
-and fix bonnet and random scratch's
-get manual and fit it-done
-put new rocker cover on-DONE
-slotted brake disc's
-chipped-Swaped with XR6 ECU-DONE
-lowered (thinking superlows)
-shift kit-DONE!-SOLD!
-white dials
-18" FPV cobra rim's rollin on HP khumo's-DONE!
-and fix bonnet and random scratch's
-get manual and fit it-done
-put new rocker cover on-DONE
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.

