RMCprime wrote:From what I've read, it wouldnt be that hard to make a car run entirely on hydrogen gas
How to Electrolyse Water
A simple way to separate water into Hydrogen and Oxygen.
Steps
First get a 9-volt battery, two pieces of copper wire (or two flat pieces of aluminum foil), and get a small container of water and fill it halfway with water.
Put a lot of salt into the water, this makes it a better conductor, stir it in well.
Put the two wires (or pieces of foil), then put the end of each wire on the nodes of the battery.
Put the other end of the wires in the water, but don't let them touch, if you have done this right, you will now see bubbles forming on the ends of the wires, these are bubbles of hydrogen and oxygen.
Tips
The closer you place the wires, the more bubbles should appear, but be careful not to touch them together.
Warnings
DO NOT STORE HYDROGEN AND OXYGEN IN THE SAME CONTAINER, because when it is mixed its highly explosive.
If you are using copper wires, the high oxygen environment will corrode the copper wire rapidly, and may fuse the wires together, halting the reaction.
Things You'll Need
9-volt battery
Two lengths of copper wire or foil.
Water
Something to hold the water in.
wicksy wrote:i thought it was braidens car at first lol, seen the white boxcar with the ba xr mags, and the colour coded garnish
Lockie wrote:You can't speak English good because you came here on a leaking door!
Users browsing this forum: No registered users