Boosted Falcon

Hektik boost gauge install bro! lol.

Just take car rotating the maf, it will in most cases change the tune because it'll measure the air a little differently. It's probably only in the lower load/rpm area's and thats why it sounds like its got a cam now. Makes it a bit harder because you can't adjust the tune yourself but you could rotate it around to find the best spot while adjusting the tune to suit?

lol, even more hektik as it doesn't even work properly!

Nah, it was idling like this before I spun the MAF around, Dion said it would when I picked it up. Plus, it was like only a quarter turn anyway. Just did it to position the loom plug to better hide the wiring below. Doesn't feel any different anyway. In fact, I just got home from NYE down the coast, and got 320kms to half a tank of premium! Still loves the freeway, just no good around town.

i wonder why its no good around town .

cheers josh.

lol, yeah, that would be the right foot at fault there! Speaking of wasting fuel, I have had my stupidest idea yet of wanting to compete in a burnout comp! I mean, how hard could it be? I have always wanted to cut sick properly one day. Two minutes or so of epic smashing couldn't hurt too much right?

Lol go to heathcote and get crazy on the burnout pad up there... will give you a bit of an idea how the car will go. It can be prety hard on your car tho it'll get hot, hard on the clutch and shit too.
Make sure you film it!

ClassicAU wrote: Two minutes or so of epic smashing couldn't hurt too much right?

lol, new sig right there.... quoted for later reminders...

Heathcotes pan is alright. still kinda small though

i got told heathcote made a new pad and its the biggest in aus?

ev does it tramp when doing a burnout?
if it was tramping on the line im guessing it does so yeah it wont be good haha.

oh and ur clutch will hate life but u didnt think that would last this long did u?
cheers josh.

Oh yeah? That's sick! I'll have to check it out next time I'm up there.

You know what, it actually doesn't tramp when cutting hoops, even in second. It only used to tramp when I tried to launch it hard off the line. I've already destroyed a couple of pairs of stockies without an issue. I think the tramp only happens when I try to minimise the wheel spin.
I know the clutch will hate it, but as you said, I consider it a dispensable item anyway. So be it, as long as I can get home afterwards I'll be happy!

ClassicAU wrote: So be it, as long as I can get home afterwards I'll be happy!

id be organising a mate with a fourby and a rental car trailer...

yeah a family friend runs a motorsport radio station in central vic (bendigo) and he was telling me on sunday.

im not sure though haha.

when u go destroy stokies ring/text me i wanna hear this thing close to limiter again (only this time with boost)
dont avalon run burnout comps once a month?
thats a small pit but itd still be fun.
cheers josh.

Meh, I don't care that much, just be something cool to do if I get a free weekend and there is a comp on somewhere. Avalon website says there is a Burnout Test n Tune on Sunday 29th of Jan, could be a goer!

For sure man, will do. Got four 16's waiting to get destroyed! Got my Driver Dynamics Advanced Car Handling day this Sunday too. So I wouldn't mind not busting the car before then, might have to wait till after that!

sounds good mate.

wheres the driving day?
cheers josh.

Apparently there is a Police Driver Training facility up in Tullamarine somewhere, I have the details at home. Going by the info and video on their website, it looks like a skid pan with sprinklers in it that constantly wet the concrete. Has the potential for epic hilarity!

If it's the one at Atwood Ev it's nothing special.

Naaw, dang, and here I was getting all excited! Thanks for the heads up anyway Tim. Should be fun either way, sliding around and not having to look over the shoulder for the fuz!

Anyway, on a different note, LEATHER SICKNESS!



Another rash purchase from good old ebay. Picked them up from a bloke up near Seymor who wrecks Fords. Came out of a series 3 Fairlane Ghia. They aren't in the best condition, they were filthy as hell. Took me a good half an hour per seat to clean them up. I ain't complaining though, especially as I got them for all of $200!! He even threw the door trims and silver handles in as well! Probably not going to put the trims on though, for a couple of reasons. They are in pretty bad condition, plus the wood grain spears will clash with the rest of my blue/black interior. Oh, and the drivers seat is electric, and the loom was already there! Bonus!

that does look nice ev. someone said in the "au corner" how smick au leather is, their right.

Fark bargain of the century with the leather. Looks tops.

Thanks blokes, I'm pretty stoked with how they came up! They are bloody comfy as, I feel like Franco Cozzo now! Well, lasted all of a couple of hours, couldn't help myself. The door trims are now on also! I cleaned them up cos I was bored, and they came up decent also, so chucked em on. I must say, the fake wood doesn't look as out of place as I thought. Plus I love the little lights on the front trims!

nice i just got leather for mine too, i paid $350 from a wrecker for seats/trims/shifter and surround. i thought mine was a good price, you damn near stole them lol.

did yours have the looms in the doors for the lights? damn my povo spec au lol.

Nice work man, did yours come from a Fairlane of a Fairmont Ghia? The rear seats I got don't quite fit properly, I am still using the cloth bolsters and the backs don't lock in cos they are off like 5mm!

Yeah, I was very happy to discover that my car has the looms for both door lights and the electric seat! Saved me a hell of a lot of stuffing around.

ClassicAU wrote:Nice work man, did yours come from a Fairlane of a Fairmont Ghia? The rear seats I got don't quite fit properly, I am still using the cloth bolsters and the backs don't lock in cos they are off like 5mm!

Yeah, I was very happy to discover that my car has the looms for both door lights and the electric seat! Saved me a hell of a lot of stuffing around.

mine were out of a fairmont ghia, au2. everything bolted straight in, but no looms for seat or lights. seat is easy, its just a ground and power feed anyway.
i dont know what im gonna do about the rear trims yet, mines wind up windows, so the rear trims are next to useless. your lucky yours was optioned with the rear power windows lol.

maybe paint the woodgrain to better match the current interior trims/colours?

EFFalcon wrote:maybe paint the woodgrain to better match the current interior trims/colours?

thats what i reckon too, or just a dark colour so they blend in. (im going carbon wrap i think)

nstg8a wrote:

EFFalcon wrote:maybe paint the woodgrain to better match the current interior trims/colours?

thats what i reckon too, or just a dark colour so they blend in. (im going carbon wrap i think)

Carbon wrap is a good idea. Or maybe even a satin silver, BA styles?

Leather looks mint by the way

Meh, the wood is growing on me actually. The camera makes it look brighter than it is, plus the steering wheel is the only blue trim left anyway, and even that is pretty dark. I think I'm going to leave it. Thanks for the comments guys.

Had my driving day today, and Tim was right, that place is pretty useless. Too small, and the skid pan was shithouse. The only thing I learned from today was that I got more enjoyment out of grip/race style driving than trying to drift. I am like tits on a bull when it came to the skid pan, didn't enjoy it at all. My favourite part was the little race track they set up with a few corners, finding the best line and hitting the apex. It has inspired me to book a proper track day with them, which I believe the run out at Sandown. Might have to look into making this thing handle first though!

jus do a winton funday for $35... cant go wrong plus theres basically nothing to hit at winton if u come unstuck

That would be awesome if it wasn't 11ty billion miles away! How busy do those days get anyway? I wouldn't expect much track time for 35 bux. The Driver Dynamics do it at Sandown.

put the vid u have up (u said in another thread u took one).

swaybars and this thing would handle ok.
my brothers handles well and he just has the front 27mm swaybar.
cheers josh.

ClassicAU wrote: I am still using the cloth bolsters and the backs don't lock in cos they are off like 5mm!
.

oh yeah apparently the easiest way round the bolster issue is to take the leather off the 'lane bolsters and re wrap your originals, pretty simple shape so it should be straight forward.

nstg8a wrote:

ClassicAU wrote:Nice work man, did yours come from a Fairlane of a Fairmont Ghia? The rear seats I got don't quite fit properly, I am still using the cloth bolsters and the backs don't lock in cos they are off like 5mm!

Yeah, I was very happy to discover that my car has the looms for both door lights and the electric seat! Saved me a hell of a lot of stuffing around.

mine were out of a fairmont ghia, au2. everything bolted straight in, but no looms for seat or lights. seat is easy, its just a ground and power feed anyway.
i dont know what im gonna do about the rear trims yet, mines wind up windows, so the rear trims are next to useless. your lucky yours was optioned with the rear power windows lol.

I have the stuff to do a rear power window conversion.....

Ev, must be a Series 2 XR loom thing, my S1 didn't have the courtesy light stuff.

The guy I bought it all off said the same thing about the bolsters, but they might require some form of stitching or securing to my bolsters, which is why I haven't bothered looking yet. That is a job for another weekend when I have time.

I was really happy to discover the the looms already there, saved a hell of a lot of swearing I can tell you!

Josh, I have the vid on my computer, but I took it in 720p so it's like 110mb! Plus it was hella windy yesterday, so you can't hear the car as much as I would have liked. I'll show you next time I come round. We'll have to catch up for stockie thrashings soon, I got the itch!
Oh, and sway bars have now graduated to next on my purchase list, will see if I can fit them in after pay day next week.

sounds good evan.

might have to throw this 3.9lsd in my ed and bring it along haha.
yeah swaybars are great, i can get them for u if ud like.
cheers josh.

Bored + 90% 16" stockies + 3 minutes of sickness =

EBOOST wrote:swaybars and this thing would handle ok.
my brothers handles well and he just has the front 27mm swaybar.
cheers josh.

Yeah swaybars in these help heaps, mine had a 30mm front one and handled like a beast!

theres too much rubber left on those tyres man...

misk wrote:theres too much rubber left on those tyres man...

Still good for rears on a daily!

thats what i was getting at :p lol
id love those tyres over whats on mine atm!
canvas makes for a scary rid on boost in the wet hahaha

It was a good sight.

sounded really good aswell.
ive got a couple of vids so if u want them ev just let me know.
cheers josh.

EBOOST wrote:It was a good sight.

sounded really good aswell.
ive got a couple of vids so if u want them ev just let me know.
cheers josh.

Gotta YouTube those vids ....