Kyle's ED Falcon GLi/NL Fairlane Ghia

burnt turtle · Post by **burnt turtle** » February 10th, 2009, 4:56 pm

[Sterling] wrote:you should be able to chirp easy as!, my mates AU XLS ute on gas can chirp and its stock!

thats amazing, does your car chirp?

[Sterling] · Post by **[Sterling]** » February 10th, 2009, 4:59 pm

burnt turtle wrote:
[Sterling] wrote:you should be able to chirp easy as!, my mates AU XLS ute on gas can chirp and its stock!
thats amazing, does your car chirp?

yes and its auto.

huggiebear · Post by **huggiebear** » February 10th, 2009, 5:09 pm

it comes down to tyres, with my shiftkitted auto i can chirp any corner, but hard to on a straight being LSD and the weight of a stereo fitted fairlane, but with the spare tyres i have here on other rims i can chirp and kick the ass end out in the dry in a straight line, in the wet i can press the brake and the acceleartor and light up both back wheels, but throw the goodyear regattas back on and i struggle to spin them in the wet!!!!

and as i have prooven cheap tyres can also grip better then expensive ones (isnt that true ryan lol)

burnt turtle · Post by **burnt turtle** » February 10th, 2009, 5:12 pm

damn "sterling" ur car must be a powerhouse
i wish my car was like that

Post by **BLCKED** » February 10th, 2009, 6:54 pm

my ed chirps through to third gear (auto) with 18" dunlops does that mean my car is a "power house" ?

burnt turtle · Post by **burnt turtle** » February 10th, 2009, 6:57 pm

if you want

Gozza · Post by **Gozza** » February 11th, 2009, 10:13 am

[Sterling] wrote:
burnt turtle wrote:
[Sterling] wrote:you should be able to chirp easy as!, my mates AU XLS ute on gas can chirp and its stock!
thats amazing, does your car chirp?
yes and its auto.

Mine doesn't - modded valve body- 345 LSD and 300hp.....Nankang tyres....

Steady · Post by **Steady** » February 11th, 2009, 10:18 am

I think in this case we are defining chrip as "on the brake trying to do a standstill and I can get one chirp".
I find it pretty hard to believe that any of the cars mentioned above are getting a decent chirp into any gear on anything other then sealed indoor carpark concrete.

bentls · Post by **bentls** » February 11th, 2009, 11:03 am

with ba's when u use the tiptronic if u back off just before ur gonna change then nail it a split second before u change it will often chirp as it confuses it to raising the line pressure i reckon.

ive done it a few tiems now..
also rolling along at like 50 or 60 on a slippery road(dry) just put it into 1 and slam the throttle and i get a chirp as it accelerates... not sure if its compression lockup or wheels spinning due to the sudden increase in torque (at about 4k in 1st) in the wet do the same it just skates out change to 2nd it keeps skating but speedo reads 140 and i poo a little.

93edxr6 · Post by **93edxr6** » February 11th, 2009, 12:31 pm

Steady wrote:I think in this case we are defining chrip as "on the brake trying to do a standstill and I can get one chirp".
I find it pretty hard to believe that any of the cars mentioned above are getting a decent chirp into any gear on anything other then sealed indoor carpark concrete.

my manual ed chiped 2nd easy as and use to just chirp third if u got the gear changes right and it was prety std.

Steady wrote: I think in this case we are defining chrip as "on the brake trying to do a standstill and I can get one chirp".

oh sorry i was thinking you ment when changing gears

Jake · Post by **Jake** » February 11th, 2009, 12:33 pm

My stock EF chirps into 2nd and into 4th, hard shifting auto and no shift kit

As long as the revs are >4000

Tyres are firehawk 225's - traction rating is AA

Dansedgli · Post by **Dansedgli** » February 11th, 2009, 12:37 pm

A page and a bit of something that a front wheel drive echo can do.

This thread has aids.

Post by **Commando** » February 11th, 2009, 12:38 pm

My car chirps when I use the remote.

Anyway, how'd you go with finding some paint for the scratch Kyle?

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 11th, 2009, 5:17 pm

Commando wrote:My car chirps when I use the remote.

Anyway, how'd you go with finding some paint for the scratch Kyle?

i havnt found any, but the main one of concern was just traded paint

, its got a dent or 2 but the scratch is gone

, now my bumper situation..........

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 19th, 2009, 1:01 pm

Just an update, after a bit of R&D, I may have another interior mod lined up for the car, it's going to be a lot of work but I don't wanna say what it is yet, just in case it's a huge disaster. I will post pics when I feel confident everything will work out

. I'll leave a hint, it's newer and looks cooler. Probably gave it away but meh

.

travs ea-xr6 · Post by **travs ea-xr6** » February 19th, 2009, 1:08 pm

el,ef dash and console, to match your door trims

Post by **EFFalcon** » February 19th, 2009, 1:16 pm

EF/EL dash's are common place now, that couldn't be a disaster

AU?

travs ea-xr6 · Post by **travs ea-xr6** » February 19th, 2009, 1:37 pm

i dont like the au dashes,id prefer el,ef any day

dont think au dash would fit e series would it

Post by **Commando** » February 19th, 2009, 1:39 pm

Poor Kev, so much work ahead!

travs ea-xr6 · Post by **travs ea-xr6** » February 19th, 2009, 1:41 pm

Commando wrote:

Poor Kev, so much work ahead!

haha wouldnt that be fun to fit, look at the difference of the shape of the dash shell

ClassicAU · Post by **ClassicAU** » February 19th, 2009, 1:43 pm

AU interior conversion FTMFW!! I still maintain they are the best looking interior Ford has come up with yet!!

nommic · Post by **nommic** » February 19th, 2009, 2:11 pm

G6ET interior is easily the best.

Post by **Commando** » February 19th, 2009, 2:15 pm

lesser comments have gotten people banned from here Ev

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 19th, 2009, 2:37 pm

haha, nah guys John is pretty well on the money, I am getting ready to do an EL Dash covnersion, Kev isn't doing it, i'm going to do it. After some R&D, learning a few things of Kev, and inspiration from NWOLB. once I get all of the parts it's pretty well getting done, im going to go the the full extent of possibly putting in NL Seats.

Just gotta find a set of NL Seats, a welder, and an EL Floor

.

ClassicAU · Post by **ClassicAU** » February 19th, 2009, 2:45 pm

Commando wrote:lesser comments have gotten people banned from here Ev

I said INTERIOR, never said anything about the body!

But yes, the G6E interior is pretty sweet, albeit still a little bit plastic.

Post by **Commando** » February 19th, 2009, 2:56 pm

ClassicAU wrote:I said INTERIOR

Commando knows that

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 19th, 2009, 3:10 pm

lol, here is a pic

Trip computer, Glove Box, Center console, Cluster Surround and radio surround(not in pic) are courtesy of Ford_Racing_8. lukeh and ruleford.

I Got hold of a DL LTD BEM and dash loom (yes i know their the same as NL but meh

), They sold it to me cheap because the cluster and trip computer looms were chopped out, i had the cluster cables from when I had my NL Cluster in the ED. I have nearly finished resurrecting this loom but not quite there yet.

Post by **pHaT`eL** » February 19th, 2009, 3:59 pm

Leave the Recaro's in there Kyle, NL seats arent that good

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 19th, 2009, 4:08 pm

pHaT`eL wrote:Leave the Recaro's in there Kyle, NL seats arent that good

lol, i guess I wanna go for something a bit bigger, i was looking at Concorde interior

Steady · Post by **Steady** » February 19th, 2009, 4:32 pm

Leave the seats and just do the dash and doortrims.
EF/EL/NF/NL seats are fukken homo.

John_LS1 · Post by **John_LS1** » February 19th, 2009, 4:50 pm

Steady wrote:Leave the seats and just do the dash and doortrims.
EF/EL/NF/NL seats are fukken homo.

+1

you've got the best E-series seats you can get!

travs ea-xr6 · Post by **travs ea-xr6** » February 19th, 2009, 4:59 pm

whats involved with changeing over the loom

braiden · Post by **braiden** » February 19th, 2009, 5:14 pm

Looking good Kyle. If you do decide to change the seats, I will buy the old ones off you.

travs ea-xr6 · Post by **travs ea-xr6** » February 19th, 2009, 5:45 pm

if you put a el seats in it i wouldent cut the flaw up just make some adapter for the seat rail or customize the rails

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » February 19th, 2009, 7:51 pm

John_LS1 wrote:
Steady wrote:Leave the seats and just do the dash and doortrims.
EF/EL/NF/NL seats are fukken homo.
+1

you've got the best E-series seats you can get!

true, but the drivers one is starting to wear a bit which upsets me cuz they are nice. How did you and Jared keep em looking so good.

private9 · Post by **private9** » February 19th, 2009, 8:22 pm

There's ways of getting in the car that seem to damage them more than others. It's just a matter of being a little careful.

travs ea-xr6 · Post by **travs ea-xr6** » February 20th, 2009, 7:11 am

snap on seat covers the go

Post by **Commando** » February 20th, 2009, 7:54 am

Kyle the youtube celebrity wrote:true, but the drivers one is starting to wear a bit which upsets me cuz they are nice. How did you and Jared keep em looking so good.

How bout getting the driver's seat fixed then?

Kyle the ED4LTR · February 20th, 2009, 10:15 am

Commando wrote:
Kyle the youtube celebrity wrote:true, but the drivers one is starting to wear a bit which upsets me cuz they are nice. How did you and Jared keep em looking so good.
How bout getting the driver's seat fixed then?

yeh thats a point, lol Dave to name in quote

Post by **EFFalcon** » February 20th, 2009, 10:21 am

We went the other way in kristy's car.. put the ED Ghia seats in the EL.
EF/EL Dash/Door trims with ED Ghia seats is about the best factory combo you'll get.

as for the AU/BA/FG dash, anything can go in with enough cutting.
its been done before!