YEAH, JUST ANOTHER BA XR6 TURBO

Phillis · Post by **Phillis** » March 8th, 2009, 9:41 pm

ahhh its the little things that make the difference.

look great man!

Tiga_EL · Post by **Tiga_EL** » March 12th, 2009, 6:07 pm

Inspirational stuff Dylan!! Looks tops!

UNEZED · Post by **UNEZED** » March 13th, 2009, 5:16 pm

the silver looks mint mate
so whats next for the beast

Post by **Bipolar** » March 13th, 2009, 5:50 pm

Looks mad. Nice work.

LOW_XR · Post by **LOW_XR** » March 13th, 2009, 6:02 pm

cheers all.

well next will be fit a new clutch so i can drive it then i gotta get some new cooler pipes to suit new cooler and fit that.
then before april i wana do the diff bush and maybe throw in some 3.7's.

thats bout it

XR6TIM · Post by **XR6TIM** » March 14th, 2009, 12:14 pm

Sick ride dude love it one of the best looking BAs ive ever seen well done.....

Post by **Sunboost** » March 14th, 2009, 2:59 pm

Hey what clutch are you gunna run Dylan? What clutch did it have before?

LOW_XR · Post by **LOW_XR** » March 14th, 2009, 11:12 pm

Sundeep wrote:Hey what clutch are you gunna run Dylan? What clutch did it have before?

hey man. im going to go the mal wood option 3 clutch.
its 11'' billet flywheei and organic clutch plate.

now i bought the car and was told it had a exedy brass cushion button clutch.

im not a big fan of this clutch as its damn heavy. bad in traffic.

LOW_XR · Post by **LOW_XR** » March 28th, 2009, 4:49 pm

hey all, finally got the clutch in. started it last night and got it all together , ready to bleed the clutch and noticed the slave cylinder had moved so i had to pull the box out again this morning to refit the slave.
so big thanks to bentley , scott , josh and dez for helping me out.

its a very nice clutch to drive.very light compered to my old one.
heres some pics of old and new.
also did a oil change on it and refilled with transmax z. expensive but good shit.

Post by **EFFalcon** » March 28th, 2009, 5:38 pm

no cooler pics yet?????

bentls · Post by **bentls** » March 28th, 2009, 6:06 pm

cooler is still sitting in shed.... piping got delivered on friday but they ignored dylans orders to have it dropped at the door so they took it back to port melbourne cos no one was home... should be re sent early next week.... bit of a pain in the ass cos we were planning on puttin it all on this weekend and gettin it retuned and puttin dyls old gear onto my car in preparation for my turbo conversion

LOW_XR · Post by **LOW_XR** » March 29th, 2009, 6:13 pm

hey all. tried this today. give us some feedback. keep it or fuk it off?

the ghia garnish incase people havnt relised.

t1MMy · Post by **t1MMy** » March 29th, 2009, 6:18 pm

Keep it. Looks good!

Jake · Post by **Jake** » March 29th, 2009, 6:18 pm

It's not too bad, I'm not sure weather I'd keep it or not.. doesn't seem to go with the orange as well as it does with other colours IMO...

cranners · Post by **cranners** » March 29th, 2009, 6:29 pm

Looks good mate, have you considered getting the chrome pin stripe as well, on the front and back bumpers?

LOW_XR · Post by **LOW_XR** » March 29th, 2009, 6:38 pm

Jake wrote:It's not too bad, I'm not sure weather I'd keep it or not.. doesn't seem to go with the orange as well as it does with other colours IMO...

thats what i always thought but bentley tried it on my car and i like it so i might get one for myself.

Nikk O'lass · Post by **Nikk O'lass** » March 29th, 2009, 7:03 pm

Go for it, adds a touch of class to a boring BA rear...

I reckon a DJR kit would look sikazz on this with its hovercraft ride height!

XR_Lightning · Post by **XR_Lightning** » March 29th, 2009, 9:00 pm

keep it on man, looks tops

nstg8a · Post by **nstg8a** » March 29th, 2009, 9:13 pm

nah imo it looks kinda weird, on a dark colour would look good but

Post by **Sunboost** » March 29th, 2009, 9:21 pm

Looks NQR on the orange I reckon. I would turf it. And the chrome in the bars idea is bad as well!

Yagz · Post by **Yagz** » March 29th, 2009, 10:18 pm

nice clutch dude.

I just did the gearbox fluid in mine, used that mainlube solid boundary gear oil stuff.. Meant to be a bit better than transmax, and it's pretty good so far.

I changed the diff fluid in my diff and noticed on the side it says "Ratio: 3.73:1" Was this standard on the MkII? I noticed you said you wanted to get those diff gears so obviously the series 1 had a different sort?

I tried to bleed my clutch only to find that it was really loose (the bleeder pole thingy) so i just emptied the reservoir and refilled with dot 4. I need to take the box out and replace the CSC with a metal one like you are, and while you're there, you might want to fit a Mal Wood remote clutch bleed line. It looks like this out the side of the box:

You can see that it ensures that when you bleed the clutch the fluid won't go into the bellhousing (if you don't use a clear tubing on the end of the nipple that is..)

You can also see in that pic the braided line that goes to the firewall...
looks good man, my clutch comes soon! Will be doing all this shortly!

Post by **pHaT`eL** » March 30th, 2009, 5:51 am

Nah, not a fan, im with Sunny on this one. Looks a tad weird on the orange.

LOW_XR · Post by **LOW_XR** » March 31st, 2009, 9:08 pm

yeah. im mixed on the garnish. i guess i could buy one, then if i get over it i could sell it.

anyway. another update.

got a nice box delivered yesterday.this is what was in it and what it looks like set up. (roughly of course)

NUT347 · Post by **NUT347** » March 31st, 2009, 9:15 pm

Does that require any cut holes? where did you get it from?

Love your car man, when my grows up, i want it to look like that!!!!!

LOW_XR · Post by **LOW_XR** » March 31st, 2009, 9:20 pm

NUT347 wrote:Does that require any cut holes? where did you get it from?

Love your car man, when my grows up, i want it to look like that!!!!!

nah mate. no holes at all. its plazmaman. a few brands do the simalar kit but you got to cut holes which i dont wana do.

haha cheers man.

BLKPHN · Post by **BLKPHN** » March 31st, 2009, 11:45 pm

Oh yeah friday can't wait dylan!!

LOW_XR · Post by **LOW_XR** » April 5th, 2009, 2:14 pm

got all the cooler fitted on friday night. thanks to bentley and a big thanks to tristan. we started friday after work. tristan came over and started on my boost pressure sensor from one side of the car to the other. the loom looks mint and factory. it was a big night but i got all the hot and cold side piping on , the cooler and cold air intake. cooler was a bit of an effort to fit but i managed to get it in there. its at bluepower now and ill get it back on tuesday (in time for hallem

).
so thanks again guys. now times for some pics.

before we started

all stripped down. halfway through loom.

all my old bits out and ready for bentleys car

bentleys david and my goliath

making sure bar fits with cooler on

needed to "trim" a bit off the front for the cai to fit

my old adn new heat shielding

more to come

falcon4L · Post by **falcon4L** » April 5th, 2009, 2:43 pm

this is a bad car love it

Kenaz · Post by **Kenaz** » April 5th, 2009, 4:34 pm

Farkin sweet! Nice work Dylan

LOW_XR · Post by **LOW_XR** » April 5th, 2009, 5:21 pm

some more:
i cant remember what order they go in but you will work it out haha.
better pics will come once i get the car home.

Post by **Sunboost** » April 5th, 2009, 5:37 pm

That's sick! Let us know how it goes. Where'd u cut that chunk frm? Coudln't work it out

LOW_XR · Post by **LOW_XR** » April 5th, 2009, 5:50 pm

under drivers headlight sunny. check 3rd last pic. ( the cai wont go on unless you cut it off

Yagz · Post by **Yagz** » April 8th, 2009, 1:41 pm

how did the tune go? what about hallem? is there a dyno day on?

LOW_XR · Post by **LOW_XR** » April 8th, 2009, 6:37 pm

the turbo actuator is now no good for my current set-up. it will not boost past 8-9 psi

so ill do the actuator and port wastegate at same time and we will go from there.

Yagz · Post by **Yagz** » April 8th, 2009, 10:30 pm

what boost did you make the 310rwkw with?

NUT347 · Post by **NUT347** » April 8th, 2009, 10:47 pm

is the turbo standard? My old mans ute runs 10psi no worries, i also know a bloke running 17psi no problems? Is the turbo actuator faulty or something??

very strange

also, give us your cooler, exhaust and fuel setup cheap

Parfrey · Post by **Parfrey** » April 8th, 2009, 10:54 pm

pretty sure it happens when you have a free flowing intake/cooler and exhaust.. fairly common mod

Steady · Post by **Steady** » April 8th, 2009, 11:10 pm

Stock actuator hasn't got enough tension to hold the gate closed on higher boost levels

Bloke I know, whos on FM, did a low 14 in his auto BA XR6T stock...
went to his tuner for a tune with cooler, injectors, fuel pump and shit... usual 300odd rwkw stuff...
they couldn't figure out why his car was spooling so slow when they tuned it, and why he basically had no control of boost...
Quick look under the heatshield... gate was flapping in the breeze, actuator not even connected...

LOW_XR · Post by **LOW_XR** » April 9th, 2009, 9:15 pm

NUT347 wrote:is the turbo standard? My old mans ute runs 10psi no worries, i also know a bloke running 17psi no problems? Is the turbo actuator faulty or something??

very strange

also, give us your cooler, exhaust and fuel setup cheap

yeah as parfey and steady said its common for it to stuff up with a free flowing intake.
i will be going the 12 lb atcuator also.\\im not selling cooler or fuel setup but zorst i am selling

LOW_XR · Post by **LOW_XR** » April 9th, 2009, 9:17 pm

Yagz wrote:what boost did you make the 310rwkw with?

that was with 12 psi.

with new stuff im going for 14 psi