Dylans HSV VE Maloo R8 #39 now with more EL :-(

LOW_XR · Post by **LOW_XR** » August 25th, 2010, 9:29 pm

misk wrote:are they as much of a **** to change as e-series?

ah ive never done a e series one but with this the sump has to come off etc etc but ill chuck in a double row timing chain and they get rid of the tensioners altogether.

Dansedgli · Post by **Dansedgli** » August 25th, 2010, 9:30 pm

Youch. Did the tensioner breaking break anything else?

LOW_XR · Post by **LOW_XR** » August 25th, 2010, 9:33 pm

not sure mate, ill go check the car out again in the next day or so. im hoping not as i wasnt counting on this shit to happen.

LOW_XR · Post by **LOW_XR** » August 25th, 2010, 9:44 pm

meh these pics show **** all as i took them before the broken tensioner was spotted. its the drivers side one anyway. and one with a few tuff holdens too.

EBOOST · Post by **EBOOST** » August 25th, 2010, 9:55 pm

ahh so it was in for cam and tune and they spotted it?
thats not to bad then was it rattley at all or what?
cheers josh.

LOW_XR · Post by **LOW_XR** » August 26th, 2010, 6:37 pm

EBOOST wrote:ahh so it was in for cam and tune and they spotted it?
thats not to bad then was it rattley at all or what?
cheers josh.

yeah spot on mate!
well it made a slight rattle at higher rpm's. but i dont know if it was that or not tho. soon find out once i get it back

but sump was off yesterday.No bits were found in there so thats good. got to hear it run for a minute today. sounded pretty good.
Still a few things to finish off but all being well ill have it back tomorrow night.....

Dansedgli · Post by **Dansedgli** » August 26th, 2010, 6:38 pm

Where are you getting the work done? How much power is expected?

LOW_XR · Post by **LOW_XR** » August 26th, 2010, 6:43 pm

C+A auto fashion. they are nice guys and are like 5 shops up from my work. WIN!!! they just had a big write up in street commodores.
i guess it was them who got me to buy a holden. always tuff cars there and the noise when they test drive them/dyno

im hoping for about 315-320 ish rwkw

John_LS1 · Post by **John_LS1** » August 26th, 2010, 6:47 pm

come to heathcote on sunday

LOW_XR · Post by **LOW_XR** » August 26th, 2010, 6:49 pm

ill break shit

EBOOST · Post by **EBOOST** » August 26th, 2010, 8:23 pm

ahh nice man atleast she's all good now and u got to it now rather than when it fell apart.
should make good power man.
cheers josh.

LOW_XR · Post by **LOW_XR** » August 26th, 2010, 8:46 pm

yeah id rather find it now ehile the motor is stripped down.fingers crossed for a good number!

KR1STO · Post by **KR1STO** » August 26th, 2010, 8:49 pm

The guys at C+A are great...
I (and the workshop I worked at) used to do autos for them...
Some nice cars have been through there...

LOW_XR · Post by **LOW_XR** » August 26th, 2010, 8:56 pm

yeah they are pretty cool. there is always at leat one awesome car in there at any one time.

just want the ute back now so i can see how it goes

EF ECTIV · Post by **EF ECTIV** » August 27th, 2010, 1:58 am

remember seeing the right up in street commos regarding C & A auto, they do paint and panel in house too yeh? Not
that it matters to you obviously but still.... Like a one stop shop type thing.... their drag car seems pretty hardcore too....

LOW_XR · Post by **LOW_XR** » August 28th, 2010, 1:23 am

all went well. picked car up tonight, very very happy. to tired and to pissed to go into details , ill post it all 2moro.

BLKPHN · Post by **BLKPHN** » August 28th, 2010, 11:27 am

details need now!

bentls · Post by **bentls** » August 28th, 2010, 1:06 pm

Heard about what happened man glad your ok and all. That's exacty why I tell people not to drink drive. Hope insurance covers it all man. Least you had some fun in it I guess.

KR1STO · Post by **KR1STO** » August 28th, 2010, 1:10 pm

serious....??????

Post by **needfordspeed** » August 28th, 2010, 1:14 pm

Doubting it!

KR1STO · Post by **KR1STO** » August 28th, 2010, 1:24 pm

me too...
can't believe anything he says....hahaha

LOW_XR · Post by **LOW_XR** » August 28th, 2010, 6:08 pm

EF ECTIV wrote:remember seeing the right up in street commos regarding C & A auto, they do paint and panel in house too yeh? Not
that it matters to you obviously but still.... Like a one stop shop type thing.... their drag car seems pretty hardcore too....

yeah man. con does panel and paint work. was a pretty good write up.

ive known them for a few years and that ute was just a tuff street car and over the years its turned into that monster you saw

LOW_XR · Post by **LOW_XR** » August 28th, 2010, 6:11 pm

BLKPHN wrote:details need now!

lol my iphone is being gay and wont laod pics.

LOW_XR · Post by **LOW_XR** » August 28th, 2010, 6:15 pm

bentls wrote:Heard about what happened man glad your ok and all. That's exacty why I tell people not to drink drive. Hope insurance covers it all man. Least you had some fun in it I guess.

hahah your real funny

i didnt smash this. nice try but bentley

LOW_XR · Post by **LOW_XR** » August 29th, 2010, 1:08 pm

ok well i finally got pictures working.

every run was very consistent and within a few kw of each other.C+A's dyno is within 2 horse power of the dyno at summernats

did a best of 340 rwkw but average was :

EBOOST · Post by **EBOOST** » August 29th, 2010, 1:33 pm

very nice man thats more than ur xr6t yeah?
how much did it cost u all up with exhaust if u dont mind me asking?
cheers josh.

Dansedgli · Post by **Dansedgli** » August 29th, 2010, 1:38 pm

fark, that is mint.

Is that just a cam, valve springs and a tune?

LOW_XR · Post by **LOW_XR** » August 29th, 2010, 1:44 pm

EBOOST wrote:very nice man thats more than ur xr6t yeah?
how much did it cost u all up with exhaust if u dont mind me asking?
cheers josh.

ah ba had 344rwkw so pretty much the same.
havnt worked out an exact figure yet cos of the snapped tensioner ect ect. ill let ya know when i know man.

EBOOST · Post by **EBOOST** » August 29th, 2010, 1:48 pm

ahh ok then still n/a these engines are animals.
bet it feels good driving it ive been in a vu with 316rwkw and dam that was quick.
fried 3rd easily he goes to the drifts now plates are dr1ft8.
cheers josh.

LOW_XR · Post by **LOW_XR** » August 29th, 2010, 1:49 pm

Dansedgli wrote:fark, that is mint.

Is that just a cam, valve springs and a tune?

cheers mate. i did cam, springs, 1 piece pushrods, tune, intake, service, tensioner, few more things i geuss.

im surprised you cant hear it from your joint when i start it

EBOOST · Post by **EBOOST** » August 29th, 2010, 1:51 pm

hows the idle man?
the guy i was talking about his idle was dam nice very lumpy.
get a vid up man.
cheers josh.

SLY5LT · Post by **SLY5LT** » August 29th, 2010, 2:02 pm

well done on the gains

oz garage had a good episode on exhaust for these.....
http://www.ozgarage.com.au/episodes/sea ... st-comparo" onclick="window.open(this.href);return false;

Post by **pHaT`eL** » August 29th, 2010, 2:04 pm

Fark! Good stuff man, now get out on the hwy and destroy some people

bentls · Post by **bentls** » August 29th, 2010, 4:17 pm

Idle is fucking mint

LOW_XR · Post by **LOW_XR** » August 29th, 2010, 4:19 pm

EBOOST wrote:hows the idle man?
the guy i was talking about his idle was dam nice very lumpy.
get a vid up man.
cheers josh.

lol idle is fairly tuff. it has a really tuff idel when there is a little bit of torque on it.
i took a video but its shit. ill do one through the week.

John_LS1 · Post by **John_LS1** » August 29th, 2010, 4:37 pm

jealous! need to check this beast out properly.

Parfrey · Post by **Parfrey** » August 29th, 2010, 5:32 pm

nice power man! how does it drive? not to angry?
gotta love the power these things make so easily

private9 · Post by **private9** » August 29th, 2010, 5:56 pm

Nice result man, told you the boys always tell you a bit lower than where they know they'll end up, always a nice surprise!

Saw this on Friday while I was there, looks mint as BTW.

KR1STO · Post by **KR1STO** » August 29th, 2010, 6:17 pm

Nice result dude!!!

LOW_XR · Post by **LOW_XR** » August 29th, 2010, 7:31 pm

EBOOST wrote:ahh ok then still n/a these engines are animals.
bet it feels good driving it ive been in a vu with 316rwkw and dam that was quick.
fried 3rd easily he goes to the drifts now plates are dr1ft8.
cheers josh.

yeah goes ok. havnt given it to it yet as dont wana fcuk the clutch yet.

i know that drift8. he drifts with james (oplese aka drift6)