NCF-302 *now selling good bits*

Post pics of your rides here
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302

Post by jazza312 »

haha cheers mate. needs a new bonnet now tho :(
are u wanting to buy the wheel or the whole car? if i get this particular car im goin to look at then the lane will be for sale i think... dont think i could afford to have 3 cars...
josh_ef
Breaking Traction
Posts: 1985
Joined: January 15th, 2010, 1:41 am

Re: NCF-302

Post by josh_ef »

just the steering wheel, i got a standard one ya could put on it to sell, or another wood grain one.
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302

Post by jazza312 »

ahh ok... i still have the original leather one here. when i sell the car i might swap em back over and sell it to ya... these woodgrain ones are pretty hard to get ya hands on so i snapped it up as soon as i saw it...
josh_ef
Breaking Traction
Posts: 1985
Joined: January 15th, 2010, 1:41 am

Re: NCF-302

Post by josh_ef »

no worries mate just let me know
URZ2NV
Idling
Posts: 190
Joined: September 25th, 2007, 12:19 pm
Location: Swan View WA

Re: NCF-302

Post by URZ2NV »

Pitty your in vic cause if you do sell this then i would snap it up.
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302

Post by jazza312 »

haha cheers mate. all it is is a simple flight to melb and an easy, reliable and smoothe ride home...
can't go wrong.
URZ2NV
Idling
Posts: 190
Joined: September 25th, 2007, 12:19 pm
Location: Swan View WA

Re: NCF-302

Post by URZ2NV »

Haahaha ur missing the part of money lol.
User avatar
huggiebear
Full Boost
Posts: 2635
Joined: August 7th, 2007, 5:27 pm
Location: brisbane - morayfield
Contact:

Re: NCF-302

Post by huggiebear »

thats ok he will take it off the price of the car ;) lol
Sante des femmes www.viagrasansordonnancefr.com pharmaciens de Belgique
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302

Post by jazza312 »

haha pay your own transport...

i've had the last 2 days off work and been to a few car yards to look at some cars, mainly au ltd's, ba fairlanes, au and ba xr8's and none of them were that great... i know my car in the end is only a shitty old fairlane but when i got back into it i felt its the only one i was satisfied with. lol weird as.
so in other words, i think im hanging onto this old girl for a while yet...

so in deciding i'm gunna keep it for a while i went to a couple of exhaust joints and priced up pacey extractors, high flow steel cats (exhaust joint told me best available), and 3 inch mandrel bent exhaust.
one joint quoted me $2130 and the other, $2000.
now this seams a bit expansive to me so i wanna know what other peoples ideas are and if there are any other alternatives to this set up...
or does anyone have a full system for sale in good nic?

cheers - jarrod
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

hey all. today i joined the b series crue and bought myself a bf 2 xr8 and am picking it up on saturday and am trading in the lane.
so now its time to take off all the good bits by saturday.
things i will take off and will be for sale
19" wheels
king SSL's and struts
dc ltd leather interior inc centre console and door trims
wood grain steering wheel (set aside for now)
sound system (may be sold)
and anything else i can get away with taking off.

if anyone is interested in anything then let me know.
all parts should be available saturday

cheers
xrghiawagon

Re: NCF-302 *now selling good bits*

Post by xrghiawagon »

aw shit... any pics of the new beast?

everyone seems to be leaving the e-series group lately for a ba/f :(
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

mi old man took a couple of photo's on his phone. didnt have the intention of buying one today but took it for a spin and couldnt resist. doesnt go as hard as a turbo but plenty good enuff for me. it makes the right noise and is fully optioned... except sunroof :(
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

xrghiawagon wrote:aw shit... any pics of the new beast?

everyone seems to be leaving the e-series group lately for a ba/f :(
lol, i could be another one, im taking a ba xr8 out tomorrow for a test drive.
Image
User avatar
LOW_XR
Hitting N2O
Posts: 3009
Joined: October 7th, 2007, 6:13 pm
Location: boronia

Re: NCF-302 *now selling good bits*

Post by LOW_XR »

xrghiawagon wrote: everyone seems to be leaving the e-series group lately for a ba/f :(

thats cos people are getting smart :o
CHRYSLER 300c SRT-8

6.1 LT HEMI
Procharger + intercooler
MagnaFlow stainless Exhaust
debadged
Black leather
4 pot brembos all round
20" wheels
sunroof
tint
touch screen dvd player , sat nav, ipod etc etc
chrome grip grille
+ more
josh_ef
Breaking Traction
Posts: 1985
Joined: January 15th, 2010, 1:41 am

Re: NCF-302 *now selling good bits*

Post by josh_ef »

has this thing got extractors?
User avatar
krisisdog
Breaking Intake Welds
Posts: 4115
Joined: August 1st, 2007, 10:03 pm
Location: Grafton

Re: NCF-302 *now selling good bits*

Post by krisisdog »

How much for the wheels?
>>> EF Futura Turbo <<<
Now rolling in a tuned turbo Forester as a daily
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

nah no extractors. almost bought some about a month ago (lucky i didnt). it does have a 2 and a half inch stainless steel exhaust that i will sell if some one could provide and fit a replacement.
i'm after a grand for the weels
they are maxxis 235/35 with good tread. done about 15000 k's
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

i also have ef fairmont ghia door trims for sale - $100
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

nstg8a wrote:
xrghiawagon wrote:aw shit... any pics of the new beast?

everyone seems to be leaving the e-series group lately for a ba/f :(
lol, i could be another one, im taking a ba xr8 out tomorrow for a test drive.
i took a ba xr8 for a drive today. was a 4 speed and compared to the bf i bought (a 6 speed auto) it didnt seem much chop. it didnt sit on the road as nice or go as well and the steering felt a bit sloppy compared to the bf and just seemed dodgey in general. i dont know too much about b series' tho. that particuar one may have just been a lemon.
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

jazza312 wrote:
i took a ba xr8 for a drive today. was a 4 speed and compared to the bf i bought (a 6 speed auto) it didnt seem much chop. it didnt sit on the road as nice or go as well and the steering felt a bit sloppy compared to the bf and just seemed dodgey in general. i dont know too much about b series' tho. that particuar one may have just been a lemon.
yeah, the one im looking at is a '03 manual, so im not getting too excited, that and the fact its massively overpriced even though its low kms and mint, dosnt seem to have any options other than leather, so yeah, we will see how negotiable they are.
Image
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

nstg8a wrote:
jazza312 wrote:
i took a ba xr8 for a drive today. was a 4 speed and compared to the bf i bought (a 6 speed auto) it didnt seem much chop. it didnt sit on the road as nice or go as well and the steering felt a bit sloppy compared to the bf and just seemed dodgey in general. i dont know too much about b series' tho. that particuar one may have just been a lemon.
yeah, the one im looking at is a '03 manual, so im not getting too excited, that and the fact its massively overpriced even though its low kms and mint, dosnt seem to have any options other than leather, so yeah, we will see how negotiable they are.
fair enuff. good luck with it, hope it all goes good.
r u gunna keep the ef? u havent had that for very long
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

im not sure, it wont be worth trading, so il probably keep it. its still a tidy old bus
Image
User avatar
NL_CONCORDE
Breaking Traction
Posts: 1283
Joined: June 15th, 2008, 12:50 am
Location: Melbourne

Re: NCF-302 *now selling good bits*

Post by NL_CONCORDE »

damn this does suck but what can i say enjoy the b-series mate sure to keep in touch
NL-16.8@79MPH 119.7rwkw(Auto),15.1@92MPH 151.5rwkw(Manual)
HYPO-NL - Pushing hard,Blowing engines It's what i do best.
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

good news. im not trading the lane now. still gettin the xr but not worth trading the lane.
i will still sell the bits and pieces if anyone is interested or sell it as is. has to go to a good home tho :)
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

lol, what did they offer you on a trade? less than a grand?
Image
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

its weird. i think he tried to stooge me. he said i can return it to stock and he would give me 2500 and then i was looking at the paper work and it said trade in $1000
so i rang him up and asked if i could just bring the extra grand and he said that was fine. lol i now own 3 cars. will have to get rid of a couple
User avatar
pHaT`eL
Moderator
Moderator
Posts: 8060
Joined: July 16th, 2007, 2:12 pm
Location: Cruise Moderator

Re: NCF-302 *now selling good bits*

Post by pHaT`eL »

I might be keen on the GTP's, will let you know in a week or so :)
[XGZ-566] 2009 BF3 XT EGAS WAGON
| 19x9 & 19X10 WORK EUROLINE'S | LOWERED |

[MR-PGR] 1980 XD FAIRMONT WAGON
| EFI WINDSOR | 14X8 & 14X10 12 SLOTTER'S | VENETIANS |

PREVIOUS RIDES: [WANTD-6] 2002 AU3 EGAS FORTE WAGON | [POPS4L] 1995 EF GLi WAGON | [EBW-302] 1991 EB GL WAGON V8 | [PHATEL] 1998 EL FAIRMONT TURBO

phat GUARD ROLLING | 0429 093 302 | facebook
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

no worries mate. they arent in 100% condition but are pretty good. i will get pics up sometime soon
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

jazza312 wrote:its weird. i think he tried to stooge me. he said i can return it to stock and he would give me 2500 and then i was looking at the paper work and it said trade in $1000
so i rang him up and asked if i could just bring the extra grand and he said that was fine. lol i now own 3 cars. will have to get rid of a couple
lol, definitly sounds like he tried to stooge you.

i didnt even get to drive the xr8 i was looking at, they wouldnt serve me lol.
Image
User avatar
private9
Hitting N2O
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Contact:

Re: NCF-302 *now selling good bits*

Post by private9 »

nstg8a wrote:
jazza312 wrote:its weird. i think he tried to stooge me. he said i can return it to stock and he would give me 2500 and then i was looking at the paper work and it said trade in $1000
so i rang him up and asked if i could just bring the extra grand and he said that was fine. lol i now own 3 cars. will have to get rid of a couple
lol, definitly sounds like he tried to stooge you.

i didnt even get to drive the xr8 i was looking at, they wouldnt serve me lol.
Fark I hate that, Ford dealers are the worst for it - you gotta wonder how many sales they lose like that.
Image
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

lol, it was at a holden dealership this time
Image
User avatar
private9
Hitting N2O
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Contact:

Re: NCF-302 *now selling good bits*

Post by private9 »

nstg8a wrote:lol, it was at a holden dealership this time
Haha - I still stick by what I said!
Image
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

heres a couple of crappy photo's from the other day. will get some good ones once i get it!

Image

Image
Last edited by jazza312 on January 5th, 2011, 10:51 pm, edited 1 time in total.
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

jazza312 wrote:heres a photo of the new beast
http://www.facebook.com/?ref=home#!/pho ... =546776436" onclick="window.open(this.href);return false;
This content is currently unavailable
The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page.
Image
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

thats gay. i will try and upload it on photobucket but i think i may have got too many photos on there
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

thats better. cant wait to saturday
User avatar
NL_CONCORDE
Breaking Traction
Posts: 1283
Joined: June 15th, 2008, 12:50 am
Location: Melbourne

Re: NCF-302 *now selling good bits*

Post by NL_CONCORDE »

looks tidy mate
NL-16.8@79MPH 119.7rwkw(Auto),15.1@92MPH 151.5rwkw(Manual)
HYPO-NL - Pushing hard,Blowing engines It's what i do best.
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: NCF-302 *now selling good bits*

Post by nstg8a »

yup, looks good all right
Image
User avatar
jazza312
Spooling Up
Posts: 773
Joined: December 7th, 2008, 8:51 pm
Location: Warragul - VIC

Re: NCF-302 *now selling good bits*

Post by jazza312 »

this poor old nc is all back to original now :(

i have the ultra low springs and shortened struts for sale. they probably only ever traveled about 20,000 km's tops. if anyone is interested, make a reasonable offer.
i also have the momo woodgrain steering wheel for sale if someone offers the right price (wont be letting it go cheaply)

the car is potentially sold, but if the sale falls through, the car is for sale at 4,000 bucks. that's with a roady and 11 months rego. just got serviced today and is running a treat.
User avatar
mad_keen
Full Boost
Posts: 2000
Joined: December 15th, 2008, 9:15 pm
Location: FNQ

Re: NCF-302 *now selling good bits*

Post by mad_keen »

LOW_XR wrote:
xrghiawagon wrote: everyone seems to be leaving the e-series group lately for a ba/f :(

thats cos people are getting smart :o
or old and boring.. either one. :|
Image
Post Reply