I'm not happy with the exhaust though, and having a look as it was up on the hoist confirmed what i was told by the previous owner. It's a stock twin system with the mufflers removed. So it's straight pipe from the cats back to the tiny little muffler thing up behind the bumper. Sounds ok from inside the car, but sounds ridiculous outside. Plus it's down on torque due to not having any back pressure. I plan to replace the whole system, maybe the cats too. I might also put slightly higher/softer springs in it too, as it is a little too jittery on bad surfaces. Other than that, I'm wrapped with the pickup!
The Ev-olution continues - more lol's within
Re: EVS DE-EVOLUTION
So the beast is officially mine! Passed road worthy today, all it needed was windscreen wiper blades and the handbrake to be adjusted! I put brand new tyres on it yesterday just to be sure, Toyo Teo Plus in 235/45/17 all round. They said everything else checked out, ball joints, suspension, no oil leaks! Gotta be happy with that! So I transferred it and put my black and white plates on it, now with lpg stickers. Also picked up a new black Momo gear knob from the Rat Global eBay store.
I'm not happy with the exhaust though, and having a look as it was up on the hoist confirmed what i was told by the previous owner. It's a stock twin system with the mufflers removed. So it's straight pipe from the cats back to the tiny little muffler thing up behind the bumper. Sounds ok from inside the car, but sounds ridiculous outside. Plus it's down on torque due to not having any back pressure. I plan to replace the whole system, maybe the cats too. I might also put slightly higher/softer springs in it too, as it is a little too jittery on bad surfaces. Other than that, I'm wrapped with the pickup!
I'm not happy with the exhaust though, and having a look as it was up on the hoist confirmed what i was told by the previous owner. It's a stock twin system with the mufflers removed. So it's straight pipe from the cats back to the tiny little muffler thing up behind the bumper. Sounds ok from inside the car, but sounds ridiculous outside. Plus it's down on torque due to not having any back pressure. I plan to replace the whole system, maybe the cats too. I might also put slightly higher/softer springs in it too, as it is a little too jittery on bad surfaces. Other than that, I'm wrapped with the pickup!
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
fark thats a mint buy.
i'd love a manual 5l AU on injected gas as a daily, dunno why lol just love the sound.
i'd love a manual 5l AU on injected gas as a daily, dunno why lol just love the sound.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
Sounds alright to me haha.
Back pressure is a load of shit man.
That gas system is where your torque has gone
Good score this car!!
Back pressure is a load of shit man.
That gas system is where your torque has gone
Good score this car!!
Get Stroked!!
AU Stroked 5.6L Ghia.
AU Stroked 5.6L Ghia.
Re: EVS DE-EVOLUTION
injected gas shouldn't lose much over petrol so maybe it just needs a proper tune.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
I wish it was injected gas man! But alas it is just a standard mixer system. There was a green AUII XR8 manual ute with injected gas for sale a few months ago, but I'm happier with a sedan. The one good thing about this exhaust is the epic burble on the over run! Not sure if it's exactly healthy for the motor to be doing that, but it's fricken addictive!
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
ohh haha well then is it a 425 mixer?
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
nevermind i can see its not lol
josh is on the money then!
josh is on the money then!
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
Yeah its a sprint gas system, was restrictive on my old eb v8 let alone this thing haha.
Ev if you off load those springs I'll take the rears!!!
Ev if you off load those springs I'll take the rears!!!
Get Stroked!!
AU Stroked 5.6L Ghia.
AU Stroked 5.6L Ghia.
Re: EVS DE-EVOLUTION
Get me a set of Pedders lows Josh and I'll straight swap ya! 
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
- Rollin
- Melting Pistons
- Posts: 7933
- Joined: July 15th, 2007, 4:35 pm
- Location: Brisbane - Driving around in a metal and glass case of emotion!
Re: EVS DE-EVOLUTION
Exhaust won't be your problem, LPG will.
Piss it off and use the money to convert to E85
Piss it off and use the money to convert to E85

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
Re: EVS DE-EVOLUTION
You've changed the gear knob and tyres, I think you should leave it at that.

manley rods, sps pistons, billet surecam, gt4202r 1.15, 6boost manifold, 60mm gate, 4" exhaust, nizpro plenum, 80mm throttle body, bosch 2000cc injectors, 2x044, -8 fuel line, standard fuel rail modified -8 in-out. c4 box 3000 stall, standard diff with 31 spline axles, full spool.
477rwkw 24psi. 9.80 @ 145mph
Re: EVS DE-EVOLUTION
Let him do the exhaust so it's not something that annoys him haha.
Just enjoy it for what it is ev
Just enjoy it for what it is ev
Get Stroked!!
AU Stroked 5.6L Ghia.
AU Stroked 5.6L Ghia.
- Rollin
- Melting Pistons
- Posts: 7933
- Joined: July 15th, 2007, 4:35 pm
- Location: Brisbane - Driving around in a metal and glass case of emotion!
Re: EVS DE-EVOLUTION
Because changing the exhaust worked out so well on the last V8 

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
Re: EVS DE-EVOLUTION
You mean on the 3V Rollin? That car's problems had nothing to do with the exhaust. Turns out it was just a coincidence that the ZF started to die as soon as I changed the exhaust. The system I had on the red AU was ficken mint! But I am in no rush to change anything else at this point. Maybe the springs, but that is not desperate either. I got through the week and lpg gauge still hasn't gone into the red yet! If I can keep that up I'll be laughing! 
Actually, the one thing that I came up with last night was finding out how feasible it would be to convert the gas system to gas injection? No idea how much of the existing system could be used? Probably not worth it, just an idea I'm floating.
Actually, the one thing that I came up with last night was finding out how feasible it would be to convert the gas system to gas injection? No idea how much of the existing system could be used? Probably not worth it, just an idea I'm floating.
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
BenJ converted his eb 6cyl to liquid injection from his standard.
Might have some idea as to what gets used and what gets thrown away.
Pretty sure it's everything gone except tank, filler and supply line
Cheers
Might have some idea as to what gets used and what gets thrown away.
Pretty sure it's everything gone except tank, filler and supply line
Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
Re: EVS DE-EVOLUTION
Benj has vapour injection, which means you keep tank, filler and supply Line. Liquid needs another tank, pump, line, basically the whole
System
System
Re: EVS DE-EVOLUTION
Thanks fellas. I did do a bit of reading after i posted that, and it seems that is definitely the case. So not worth it really, might as well have bought one without and converted from scratch! No matter. I think I'll go for a drive now! 
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
lol you can buy the kit to convert it to injection for $400, but if you dont have the skills to install you have to pay obviously.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
do you have a link to this 400$ system misk?
Re: EVS DE-EVOLUTION
http://www.aliexpress.com/item/Propane- ... 26886.html" onclick="window.open(this.href);return false;
there is others that are cheaper, but dont have time to search through them all atm
there is others that are cheaper, but dont have time to search through them all atm
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
- galapogos01
- Hitting N2O
- Posts: 3550
- Joined: July 14th, 2007, 9:39 am
- Location: T.I. Performance HQ
Re: EVS DE-EVOLUTION
Yeah, if you want to up the performance, look into vapour injection rather than changing the exhaust. But I reckon just leave it as-is, sounds like it gets good economy, sounds good and drives well!
Good buy.
Good buy.
Re: EVS DE-EVOLUTION
Ev if you can get someone who knows what theyre doing to fit it up for you the vapour kit would be a good idea, especially if you plan to hang on to this one for a while.
>>> EF Futura Turbo <<<
Now rolling in a tuned turbo Forester as a daily
Now rolling in a tuned turbo Forester as a daily
-
chrispie123
- Idling
- Posts: 104
- Joined: August 6th, 2007, 4:50 pm
Re: EVS DE-EVOLUTION
Lol who's trying to build their next car at Evs expense haha
Re: EVS DE-EVOLUTION
Hmm, interesting. Thanks for the link Misk! I might eventually make some calls and see if any gas places are willing to do the job. I would rather get a new exhaust and springs first before anything else though.
And in other news, to help that cause, I sold the Turd today! Put it up on car sales and had three calls the following day. Got $1500 for it this afternoon!
And in other news, to help that cause, I sold the Turd today! Put it up on car sales and had three calls the following day. Got $1500 for it this afternoon!
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
suggesting vapor injection is a bit different to pushing someone to turbo their car...chrispie123 wrote:Lol who's trying to build their next car at Evs expense haha
if its running good at the moment then theres no need to change until he wants more power, thats really it.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
-
chrispie123
- Idling
- Posts: 104
- Joined: August 6th, 2007, 4:50 pm
Re: EVS DE-EVOLUTION
Lol was only shit stirring
Re: EVS DE-EVOLUTION
i know that lol, but i think ev has had his fair share of doing shit was prob a bit out of his depth, so maybe this car will be a good change?
time will tell...
time will tell...
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
As much as everyone is under the impression I fold to peer pressure, I like to think I have some autonomous thought about my purchases! At least lately anyway. The Raptor on the Red Baron worked out great as far as I am concerned. The only issues I ever had after the tune was sorted, was melted belts. That was due to trying to take the setup beyond it's limits. It was a street setup, and performed that task awesomely!
Anyway, as for the question of vapor injection on the new pickup, it is more for reliable performance anyway. It very much does not like being pushed when running on lpg as it is. Any more than half throttle and it will cough and splutter and generally hate life. But I just put that down to being a standard mixer setup that's only designed for regular economy driving. I figure if I want to push it, I will simply flick it to petrol. Runs completely fine on petrol. So I though an injection kit might help it perform better on lpg also. As I said, it's not desperate, just something I figure would be nice to have.
Anyway, as for the question of vapor injection on the new pickup, it is more for reliable performance anyway. It very much does not like being pushed when running on lpg as it is. Any more than half throttle and it will cough and splutter and generally hate life. But I just put that down to being a standard mixer setup that's only designed for regular economy driving. I figure if I want to push it, I will simply flick it to petrol. Runs completely fine on petrol. So I though an injection kit might help it perform better on lpg also. As I said, it's not desperate, just something I figure would be nice to have.
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
I would look into the injection kits, my mate had one on his EF XR8, and just got a kit put on his BA XR8. He said it was so much nicer in the performance dept with the injection over the converter style setup. Still had the same balls on gas as on petrol with the injection.
Re: EVS DE-EVOLUTION
Get better economy because there isn't a restriction in the air flow
Cheers
Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
- nothin suss
- Full Boost
- Posts: 2808
- Joined: August 5th, 2007, 12:31 pm
- Location: G-Schlong
Re: EVS DE-EVOLUTION
Sounds like a decent upgrade! Best thing is legally nothing would have to be plated or declared. It's probably in your interest to get someone knowledgable still to carry out the work for safety.
I wonder if anyone has fitted a system like that to an EGAS or DLPG factory vehicle?
Sorry about the hijack!
I wonder if anyone has fitted a system like that to an EGAS or DLPG factory vehicle?
Sorry about the hijack!
BF2 DLPG Wagon - daily duties
BF Fairlong Ghia - ED Sprint
BF Fairlong Ghia - ED Sprint
Re: EVS DE-EVOLUTION
Yeah I've thought about it.
I'd love to do it to our wagon
I'd love to do it to our wagon
Get Stroked!!
AU Stroked 5.6L Ghia.
AU Stroked 5.6L Ghia.
Re: EVS DE-EVOLUTION
Apparently there have been a couple of eGas cars converted, but I can't find much recent info. Does anyone have any suggestions of decent lpg shops in Melbourne I should call to get an idea?
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
lol that will be the hard part, finding a good cheap LPG place...
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
Apparently there is a good shop in Frankston. I'll try and get details for you.
Cheers
Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
Re: EVS DE-EVOLUTION
Had a few customers go through them.
Cheers
Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low
Soon To Be Manual
Re: EVS DE-EVOLUTION
Haha, that's the one Misk!
Thanks dude! I don't mind driving over the other side of town if they are going to do a good job!SnipeZ wrote:Apparently there is a good shop in Frankston. I'll try and get details for you.
Cheers
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
Re: EVS DE-EVOLUTION
APS is real good but prob a bit exxy
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger
soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing
XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities
Re: EVS DE-EVOLUTION
Lol it's got like 260,000km just keep the mixer setup and save your dosh.
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
Vixen BF F6 R-Spec
